Seems you have the wrong signaling or r2 variation configured. Ask your
telco provider. If it do not help to solve the problem, may be you will
need to tweek your libmfcr2.
I had to change a couple lines to make it play nice with collect calls
in Brazil (thank you, Steve).
Good luck,
--
Paulo Scardine
Maximo Villamayor escreveu:
Hello list!
I have a TE110P card installed with asterisk at home 2.0
When I try to make a call, I have the following error in the
/var/log/asterisk/full
Apr 19 17:53:34 WARNING[14304] chan_unicall.c: Unicall/1 event
Protocol failure
Apr 19 17:53:34 VERBOSE[14304] logger.c: -- *Unicall/1 protocol
error. Cause 32771*
Apr 19 17:53:34 WARNING[14304] chan_unicall.c: MFC/R2 UniCall/1
Channel echo cancel
Apr 19 17:53:34 DEBUG[14304] chan_unicall.c: disabled echo
cancellation on channel 1
Apr 19 17:53:34 WARNING[14304] chan_unicall.c: MFC/R2 UniCall/1
<- 1001 [1/ 1/Idle /Idle ]
Apr 19 17:53:34 WARNING[14304] chan_unicall.c: MFC/R2 UniCall/1 1001
-> [1/ 1/Idle /Idle ]
Apr 19 17:53:34 WARNING[14304] chan_unicall.c: MFC/R2 UniCall/2
<- 1001 [2/ 2/Seize ack /Seize ack ]
Apr 19 17:53:34 WARNING[14304] chan_unicall.c: MFC/R2 UniCall/2 Far
end disconnected(cause=Normal, unspecified cause [31]) - state 0x2
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
