hum, the last time i downloaded something every file has different dates. However, im looking at a new version that i have downloaded today:
http://www.soft-switch.org/downloads/unicall/unicall-0.0.3pre9/libmfcr2-0.0.3.tar.gz And checking the source it seems that tar is the most recent version. I check the version looking in the C code for a fix i know must be there, in mfcr2.c line 2780, after the generation tone it must OR the signal with 0x80. Let me tell you that I have not tested that version. I have a custom version that i fixed (because it gave me the same error you have) and I sent the fix to Steve Underwood, but he told me that my fix was not error proof, and that may fail (I have 1 month now in a production server with no problems tough), so he made a similar fix, and told me that was more reliable. The link I just gave you is for the TAR with Steve Underwood fix. I guess you already contacted me off-list to quote you for my consultory. If you still have problems let me know and i may be able to help you through SSH. Best Regards On 4/21/06, Anton Krall <[EMAIL PROTECTED]> wrote: > Moises, how can I find out which version Im running, on Steves ftp all say > 0.0.3 or the date also says the same date. > > > |-----Original Message----- > |From: [EMAIL PROTECTED] > |[mailto:[EMAIL PROTECTED] On Behalf Of > |Moises Silva > |Sent: Friday, April 21, 2006 9:43 AM > |To: Asterisk Users Mailing List - Non-Commercial Discussion > |Subject: Re: [Asterisk-Users] Unicall MFRC2 Problems with BrT. > | > |A couple of weeks ago, libmfcr2 has a small error in the tone > |signaling for the call setup, that was fixed 2 weeks ago or > |so, please, wich version of libmfcr2 are you using? if you > |dont know try upgrading to the latest version. Im pretty much > |sure that you have the very same problem we had. > | > |Regards > | > |On 4/21/06, Jefferson Carvalho <[EMAIL PROTECTED]> wrote: > |> Hello All, > |> > |> I'm facing problems with Unicall on this scenario : > |> > |> CentOS 4.3 - Running on x86_64 > |> Asterisk 1.2.7.1 > |> Zaptel 1.2.5 > |> > |> When running zttool , shows all Spans OK. > |> > |> But I can't receive and make calls. > |> > |> I tried to change many parameters and still doesn't work. > |> > |> Any clues ? > |> > |> * unicall.conf > |> > |> [channels] > |> > |> language=br > |> > |> context=incoming-pstn > |> usecallerid=yes > |> hidecallerid=no > |> immediate=no > |> callwaitingcallerid=yes > |> threewaycalling=yes > |> transfer=yes > |> cancellforward=yes > |> callreturn=yes > |> echocancel=yes > |> echocancelwhenbridged=yes > |> > |> rxgain=0.0 > |> txgain=0.0 > |> faxdetect=both > |> loglevel=255 > |> protocolclass=mfcr2 > |> protocolvariant=br,20,4 > |> protocolend=cpe > |> group=1 > |> callgroup=1 > |> > |> channel => 1-15 > |> channel => 17-31 > |> channel => 32-46 > |> channel => 48-62 > |> channel => 63-77 > |> channel => 94-108 > |> channel => 110-124 > |> > |> * zaptel.conf * > |> > |> loadzone=br > |> defaultzone=br > |> > |> > |> span=1,1,0,cas,hdb3 > |> cas=1-15:1101 > |> cas=17-31:1101 > |> > |> span=2,0,0,cas,hdb3 > |> cas=32-46:1101 > |> cas=48-62:1101 > |> > |> > |> span=3,0,0,cas,hdb3 > |> cas=63-77:1101 > |> cas=79-93:1101 > |> > |> span=4,0,0,cas,hdb3 > |> cas=94-108:1101 > |> cas=110-124:1101 > |> > |> > |> > |> * lor error * > |> > |> -- Executing Dial("SIP/1000-1de2", "Unicall/g1/40020022|40|Ttr") > |> in new stack Apr 20 19:13:57 WARNING[30676]: chan_unicall.c:627 > |> unicall_report: MFC/R2 > |> UniCall/1 Call control(1) > |> Apr 20 19:13:57 WARNING[30676]: chan_unicall.c:627 unicall_report: > |> MFC/R2 > |> UniCall/1 Make call > |> Apr 20 19:13:57 WARNING[30676]: chan_unicall.c:627 unicall_report: > |> MFC/R2 > |> UniCall/1 Making a new call with CRN 32769 Apr 20 19:13:57 > |> WARNING[30676]: chan_unicall.c:627 unicall_report: MFC/R2 > |> UniCall/1 0001 -> [1/ 1/Idle /Idle ] > |> -- Called g1/40020022 > |> Apr 20 19:13:57 WARNING[30676]: chan_unicall.c:2644 handle_uc_event: > |> Unicall/1 event Dialing > |> Apr 20 19:13:57 WARNING[30676]: chan_unicall.c:627 > |unicall_report: MFC/R2 > |> UniCall/1 <- 1111 [1/ 40/Seize /Idle ] > |> Apr 20 19:13:57 WARNING[30676]: chan_unicall.c:627 > |unicall_report: MFC/R2 > |> UniCall/1 4 on -> [2/ 40/Group I /Idle ] > |> Apr 20 19:14:02 WARNING[30676]: chan_unicall.c:627 > |unicall_report: MFC/R2 > |> UniCall/1 R2 prot. err. [2/ 40/Group I /DNIS > | ] cause > |> 32769 - T1 timed out > |> Apr 20 19:14:02 WARNING[30676]: chan_unicall.c:627 > |unicall_report: MFC/R2 > |> UniCall/1 4 off -> [1/ 1/Idle /Idle ] > |> Apr 20 19:14:02 WARNING[30676]: chan_unicall.c:627 > |unicall_report: MFC/R2 > |> UniCall/1 1001 -> [1/ 1/Idle /Idle ] > |> Apr 20 19:14:02 WARNING[30676]: chan_unicall.c:2644 handle_uc_event: > |> Unicall/1 event Protocol failure > |> -- Unicall/1 protocol error. Cause 32769 Apr 20 19:14:02 > |> WARNING[30676]: chan_unicall.c:627 unicall_report: MFC/R2 > |> UniCall/1 Channel echo cancel > |> Apr 20 19:14:03 WARNING[30676]: chan_unicall.c:627 unicall_report: > |> MFC/R2 > |> UniCall/1 Channel gains > |> Apr 20 19:14:03 WARNING[30676]: chan_unicall.c:627 unicall_report: > |> MFC/R2 > |> UniCall/1 Channel switching > |> -- Hungup 'UniCall/1-1' > |> == Everyone is busy/congested at this time (1:0/0/1) > |> == Auto fallthrough, channel 'SIP/1000-1de2' status is > |'CHANUNAVAIL' > |> Apr 20 19:14:03 WARNING[30664]: chan_unicall.c:627 > |unicall_report: MFC/R2 > |> UniCall/1 <- 1011 [1/ 1/Idle /Idle ] > |> Apr 20 19:14:03 WARNING[30664]: chan_unicall.c:627 > |unicall_report: MFC/R2 > |> UniCall/1 1001 -> [1/ 1/Idle /Idle ] > |> > |> Jefferson Carvalho > |> > |> > |> > |> > |> _______________________________________________ > |> --Bandwidth and Colocation provided by Easynews.com -- > |> > |> Asterisk-Users mailing list > |> To UNSUBSCRIBE or update options visit: > |> http://lists.digium.com/mailman/listinfo/asterisk-users > |> > | > | > |-- > |"Su nombre es GNU/Linux, no solamente Linux, mas info en > |http://www.gnu.org" > |_______________________________________________ > |--Bandwidth and Colocation provided by Easynews.com -- > | > |Asterisk-Users mailing list > |To UNSUBSCRIBE or update options visit: > | http://lists.digium.com/mailman/listinfo/asterisk-users > | > | > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > -- "Su nombre es GNU/Linux, no solamente Linux, mas info en http://www.gnu.org" _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users