RumaTech wrote:
Hi, all
I finally got myself one of those SIPURA boxes. It is labeled as
Linksys, but this is actually a SP3000 box.
Anyway, unit has lots of configuration parameters. Not all are obvious.
At the moment it registers against my *, but all the calls I do from
analog phone connected to it, go to VoIP channel. As this part is
still in testing, I want all the outgoing calls got to PSTN by default
and dial, say 0, to get an "outside VoIP line".
I would like to do it as part of SP3000 configuration, not as part of
* dialplan. Can someone help me?
Use the gw0 directive in your SPA Dialplan. For example to get all 7
digit dialed calls to go out the FXO port, you can put in the following
code:
xxxxxxx<:@gw0>
Thanks,
Rudolf
P.S. I am reading the manual now, but it is rather large. I want to
have SP3000 installed now, but to avoid screams from my wife, I want
analog phone to work as an analog phone for now while I am playing
with configuration and * dialplans.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
Andres
Technical Support
http://www.telesip.net
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
