Likewise here. Using a 10 port FXO card and no problems detecting remote hangup. I'll grant you it can be a little slow sometimes however.
On Mon, 2006-04-24 at 16:54 -0500, Rich Adamson wrote: > Mike Garey wrote: > > As far as I can tell, after discussing this matter with other asterisk > > users in my area, my telco _does_ provide disconnect supervision.. It > > seems that the problem is actually related to the Sangoma A200 card > > I'm using, as two other people both using this same card have > > expressed the same problem.. Are there any other users on this list > > using the Sangoma A200 FXO port card, and experiencing problems with > > asterisk not detecting when a channel has been disconnected? Thanks, > > Hasn't been a problem here with either the TDM400 or A200D cards (both > are in use in same box). > > Just tested it again from an external pstn phone, calling into asterisk. > When the pstn phone hangs up, asterisk recognized it and dropped the sip > session that was handling the call (to a 7960). > > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
