I am have this problem too Please, if you solve this problem send me solution
I live in brazil and use CTBC TELECOM -----Mensagem original----- De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Em nome de Moises Silva Enviada em: quarta-feira, 26 de abril de 2006 10:39 Para: Asterisk Users Mailing List - Non-Commercial Discussion Assunto: Re: [Asterisk-Users] MFCR2 in Brazil, someone? Hi Melcon, thanks for answering. That means you have a working installation? Were using a Tormenta 4 ports card. unicall.conf is not important. Im not using asterisk to test. Im using "testcall", the program that comes with unicall distribution. I have done a couple of installations in Mexico with digiums card and sangoma card, but this is the first one in brazil and with tormenta card. I use testcall because is easier to detect problems. From logging the tone signaling I know the first tone is sent to the telco, but we never get a tone back, so the same first tone we sent keeps there until the 5 seconds of T1 timer expires. I have incremented the timer, but does the same, the tone keeps there until the timer expires. zaptel.conf is: span=1,1,0,cas,hdb3 cas=1-15:1101 dchan=16 cas=17-31:1101 giving a cat to /proc/zaptel/1 show all the channels configured properly. But also shows a message like this: BPV count: 192 FAS error count: 6 Not sure what it means, i will start looking in google and the source code. Any help, hint, advice will be appreciated. On 4/25/06, Melcon Moraes <[EMAIL PROTECTED]> wrote: > Which version of unicall and spandsp are you using? How is your > zaptel.conf and unicall.conf? > > []'s > MM > > -----Original Message----- > From: "Moises Silva" <[EMAIL PROTECTED]> > To: "Asterisk Users Mailing List - Non-Commercial Discussion" <[email protected]> > Cc: > Sent: Tue, 25 Apr 2006 12:45:41 -0500 > Delivered: Tue, 25 Apr 2006 11:48:34 > Subject:[Asterisk-Users] MFCR2 in Brazil, someone? > > Does anybody have a working Asterisk server with Unicall using MFCR2 > in Brazil? Were having problems. It seems SPANDSP never detect the > tones from the telco. Im using brazil protocol variant. Im having > lots of problems > to find out why spandsp seems to not detect the MF tones. We send the > first digit, the telco says they receive it, and respond with the proper > signal to ask for the next digit, we just never detect the tone and the T1 > timer times up. Some custom logs i have put in mfcr2.c point to spandsp > r2_mf_rx always returning a zero value, what seems to mean OFF TONE, > because it automatically sends the code to mf_tone_off_event() but without > expecting tone because it never enters to mf_tone_on_event() > > something like this: > > OUR PBX =========> seize ============> TELCO > <========= seize ACK <======= > ==========> First DNIS tone ==> > here we never detect the tone from the telco > > the server is Linux switch-cwb.jeffnetworks.com 2.6.9-34.ELsmp #1 SMP Thu > Mar 9 06:23:23 GMT 2006 x86_64 x86_64 x86_64 GNU/Linux > > already tried different spandsp versions without success. > > Thanks in advance. > > -- > "Su nombre es GNU/Linux, no solamente Linux, mas info en http://www.gnu.org"; > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > E-mail classificado pelo Identificador de Spam Inteligente Terra. > Para alterar a categoria classificada, visite > http://mail.terra.com.br/protected_email/imail/imail.cgi?+_u=levelz&_l=1,114 5987314.216908.1433.arrino.terra.com.br,5013,Des15,Des15 > > > --Original Message Ends-- > > -- > Melcon Moraes <[EMAIL PROTECTED]> > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > -- "Su nombre es GNU/Linux, no solamente Linux, mas info en http://www.gnu.org"; _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
