Hey guys
This is probably for Armin, but I thought maybe someone else might have
something I could try. I'm having a problem with one of my Eicon Diva
V-4BRI cards and I'm trying to work out if its a driver configuration
error, card failure or telco problem:
I have an Asterisk box running -- the Eicon drivers see all four ports
on my card, capi.conf is configured with all four ports and when I issue
a "capi info" on the Asterisk CLI, I see all four ports.
The problem is, I only have two ISDN2 lines connected, to ports one and
two. I configured capi.conf with only two controllers, but Asterisk
still sees all four. If I try to dial-out on anything but the first
port, it just hangs (and I get an engaged tone once two lines are up,
suggesting that the 2nd port just isn't working properly).
However, I've swapped cables and NT1s, and both lines work in Port 1 of
the Eicon Diva. But I can't see any configuration difference between
this server and the other server I have that is working fine across its
two ports.
Does anyone know of any Eicon diagnostics I can run to see if the second
port is actually up? I've been through the Diva webinterface, but I'm
not actually sure what to look for!
Thanks,
Avi
--
National Manager - Special Projects
< Sydney / Melbourne / Canberra / Hobart / London />
2/340 Gore Street T: +61 (0) 3 9486 0411
Fitzroy, VIC F: +61 (0) 3 9486 0611
3065 W: http://www.squiz.net/
.....>> Open Source - Own it - Squiz.net ...../>
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
