Since I am using [EMAIL PROTECTED] 2.8 which now uses freePBX, there does not seem to be a menu area/settings for "Incoming Calls"?
If you have a similiar setup, or know what the settings should be, could you possibly post them? If I were to create a dial group to ring all extensions, could that be used in place of "s"? Thanks kindly > -----Original Message----- > From: Time Bandit [mailto:[EMAIL PROTECTED] > Sent: Thursday, April 27, 2006 6:19 AM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [Asterisk-Users] Unable to accept incoming PSTN calls > > > > [from-pstn] > > include => from-pstn-custom ; create this context in > extensions_custom.conf to include customizations > > include => ext-did > > ;exten => fax,1,Goto(ext-fax,in_fax,1) > > exten => _.,1,Wait(1) > > exten => _.,2,Goto(from-pstn,s,1) > > Here is what is happening : > > Your ZAP channels are in the context "from-pstn" > Since there is no "s" extension defined, it goes to "_." > (which match anything) > > So, like seen in the log, Asterisk wait a second, then execute > "Goto(from-pstr,s,1)" which brings it back to "_.,1". It just loop > there until the caller hangup > > Since you're using [EMAIL PROTECTED], you have to go into AMP (or FreePBX) > and click > on Setup -> Incoming Calls and define something to do with incoming > calls > > hth > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
