Thnks for the link. However, I know span 1 is pri because when I add the vpmsupport=0 parameter when loading wct4xxp, everything works and those messages don't show up. I think vpmsupport=0 parameter disable echo cancellation on the board (I have TE411P card).
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Gareth Blades Sent: Thursday, April 27, 2006 10:36 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] PRI configuration Quoting http://www.asteriskguru.com/tutorials/e1t1.html -- configuration on SBC. If you are being flooded (several times a second, non stop and the pri never worked) by lines as: Jul 14 13:55:21 NOTICE[19519]: chan_zap.c:7874 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 Then probably the PRI you are using is not using PRI signalling but maybe some other type of signalling like E&M. On Thu, 2006-04-27 at 14:58, Wai Wu wrote: > > Hi, > > I am getting this message on the * console on my first pri span. Pri > show span show it is down, and I can't make any calls from the span. > > Apr 27 07:40:23 NOTICE[23988]: chan_zap.c:8202 pri_dchannel: PRI got > event: HDLC Abort (6) on Primary D-channel of span 1 Apr 27 07:40:23 > NOTICE[23988]: chan_zap.c:8202 pri_dchannel: PRI got > event: HDLC Abort (6) on Primary D-channel of span 1 Apr 27 07:40:23 > NOTICE[23988]: chan_zap.c:8202 pri_dchannel: PRI got > event: HDLC Abort (6) on Primary D-channel of span 1 Apr 27 07:40:24 > NOTICE[23988]: chan_zap.c:8202 pri_dchannel: PRI got > event: HDLC Abort (6) on Primary D-channel of span 1 Apr 27 07:40:24 > NOTICE[23988]: chan_zap.c:8202 pri_dchannel: PRI got > event: HDLC Abort (6) on Primary D-channel of span 1 Apr 27 07:40:24 > NOTICE[23988]: chan_zap.c:8202 pri_dchannel: PRI got > event: HDLC Abort (6) on Primary D-channel of span 1 Apr 27 07:40:24 > NOTICE[23988]: chan_zap.c:8202 pri_dchannel: PRI got > event: HDLC Abort (6) on Primary D-channel of span 1 Apr 27 07:40:26 > NOTICE[23988]: chan_zap.c:8202 pri_dchannel: PRI got > event: HDLC Abort (6) on Primary D-channel of span 1 Apr 27 07:40:26 > NOTICE[23988]: chan_zap.c:8202 pri_dchannel: PRI got > event: HDLC Abort (6) on Primary D-channel of span 1 Apr 27 07:40:26 > NOTICE[23988]: chan_zap.c:8202 pri_dchannel: PRI got > event: HDLC Abort (6) on Primary D-channel of span 1 Apr 27 07:40:26 > NOTICE[23988]: chan_zap.c:8202 pri_dchannel: PRI got > event: HDLC Overrun (7) on Primary D-channel of span 1 > > > This is my zapata.conf > > [channels] > ; > ; Default language > ; > language=en > ; > ; Default context > ; > context=demo > ; > ; Switchtype: Only used for PRI. > ; > ; national: National ISDN 2 (default) > ; dms100: Nortel DMS100 > ; 4ess: AT&T 4ESS > ; 5ess: Lucent 5ESS > ; euroisdn: EuroISDN > ; ni1: Old National ISDN 1 > ; qsig: Q.SIG > ; > switchtype=national > ; > ; Some switches (AT&T especially) require network specific facility IE > ; supported values are currently 'none', 'sdn', 'megacom', 'accunet' > ; > ;nsf=none > ; > > group = 1 > switchtype=national > signalling=pri_cpe > context=demo > channel => 1-23 > > group = 2 > switchtype=national > signalling=pri_cpe > context=demo > channel => 25-47 > > Everything else is commented out, and I don't want to include them here. > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users