Thanks for your reply. I put mode = insecure in the sip.conf file but I'm still getting the 407 message from asterisk when I a call is forwarded from the Mediatrix gateway. I'm pasting my sip.conf file. Is mode = insecure right or should I use different syntax. Thanks for your help!
[general] port = 5060 ; Port to bind to (SIP is 5060) bindaddr = 0.0.0.0 ; Address to bind to (all addresses on machine) disallow=all allow=ulaw allow=alaw context = from-sip-external ; Send unknown SIP callers to this context callerid = Unknown mode = insecure #include sip_nat.conf #include sip_custom.conf #include sip_additional.conf > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:asterisk-users- > [EMAIL PROTECTED] On Behalf Of Kevin P. Fleming > Sent: 29 April 2006 13:17 > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [Asterisk-Users] Help with Mediatrix 1204 > > Frank Attard wrote: > > > I am pasting 3 SIP messages between the Mediatrix (192.168.0.27) and > > Asterisk (192.168.0.6) upon an incoming call. Asterisk is returning 407 > > error. > > 407 is not an error. SIP errors are in the 5xx and 6xx range. 407 means > Asterisk is expecting the SIP device to provide authentication > information. If you don't want that to be done, then you will need to > tell Asterisk to use 'insecure' mode in sip.conf. > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
