span=1,1,0,esf,b8zs
As it stands, you are not taking timing from the PRI. Changing the second digit of the span entry to 1 will tell Asterisk to use that line as the clock master.
HTH,
James
On 5/1/06 1:58 PM, "Dan Brummer" <[EMAIL PROTECTED]> wrote:
Thank you for the reply Alexandar.
After I restarted my dev machine I recieved these messages from asterisk:
chan_zap.c:2290 pri_find_dchan: No D-channels available! Using Primary channel 24 as D-channel anyway!
chan_zap.c:8202 pri_dchannel: PRI got event: No more alarm (5) on Primary D-channel of span 1
May 1 10:23:27 WARNING[3882]: chan_zap.c:2290 pri_find_dchan: No D-channels available! Using Primary channel 24 as D-channel anyway!
So you are right on the D-Chan. If my telco says everything is ok, what should I look at next?
AFAIK this PRI was in working condition before I moved it to the asterisk test machine.
Thanks!
-Dan
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Alexander Lopez
Sent: Monday, May 01, 2006 11:53 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] Problems with zaptel and TE210P
Looks like your D-channel is down.
Ztcfg reports all is ok, b/c as far as iut is concerned, it is talking to your card just fine. LibPri handles the PRI implemetaton.
Since you are able to see the pri commands from the CLI, Isdn supprt is linked into your asterisk core.
Call your telco and ask if they have your D-channel in a loop.
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dan Brummer
Sent: Monday, May 01, 2006 2:48 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] Problems with zaptel and TE210P
Some more info to my problem:
ipt-dev01*CLI> zap show status
Description Alarms IRQ bpviol CRC4
T2XXP (PCI) Card 0 Span 1 OK 0 0 0
ipt-dev01*CLI> pri show span 1
Primary D-channel: 24
Status: Provisioned, Down, Active
Switchtype: National ISDN
Type: CPE
Window Length: 0/7
Sentrej: 0
SolicitFbit: 0
Retrans: 0
Busy: 0
Overlap Dial: 0
T200 Timer: 1000
T203 Timer: 10000
T305 Timer: 30000
T308 Timer: 4000
T313 Timer: 4000
N200 Counter: 3
Any ideas? ZTCFG looks good.
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dan Brummer
Sent: Monday, May 01, 2006 10:41 AM
To: [email protected]
Subject: [Asterisk-Users] Problems with zaptel and TE210P
Hello,
I'm just starting out with asterisk and I'm playing around with the system. Currently I have a Digium TE210P connected to a PRI on the Asterisk server. I have a SIP soft phone on my laptop for testing that is working fine. When I try to place a call from my soft phone I get this from Asterisk:
May 1 09:11:41 NOTICE[20098]: app_dial.c:1029 dial_exec_full: Unable to create channel of type 'Zap' (cause 34 - Circuit/channel congestion)
== Everyone is busy/congested at this time (1:0/1/0)
== Auto fallthrough, channel 'SIP/test-3a26' status is 'CONGESTION'
#/etc/zaptel.conf:
span=1,0,0,esf,b8zs
bchan=1-23
dchan=24
#/etc/asterisk/zapata.conf:
[channels]
switchtype=national
context=default
signalling=pri_cpe
group=1
channel => 1-23
#/etc/asterisk/extensions.conf:
[general]
static=yes
writeprotect=no
autofallthrough=yes
[default]
exten => 123,1,Answer()
exten => 123,2,Playback(hello-world)
exten => 123,3,Hangup()
exten => _9NXXXXXX,1,Dial(Zap/g1)
Any ideas? Thank you in advance, your help is greatly appreciated.
-Dan
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
