of slot PCI, removes the board and restarts the server. Later it again board the TE110P in slot correctly and restarts the server, must resolv this problem. In the case of wcfxo, I find that this problem is in relation to the modules, if will be able effects one again "make clean" and one "make" and "make install" of asterisk. I wait to have helped. Regards
2006/5/2, Wai Wu <[EMAIL PROTECTED]>:
I can either get the TE100P working or the 3 X100P clones working, but
never both. I have the TE100P connected to a channel bank, and X100P
clones to lines from the phone company.
This is my zaptel.conf
span=1,1,0,d4,ami
fxsks=1-24
loadzone=us
fxols=25-27
loadzone=us
I then do
[EMAIL PROTECTED] root]# modprobe zaptel
[EMAIL PROTECTED] root]# modprobe wcte11xp
ZT_CHANCONFIG failed on channel 25: No such device or address (6)
/lib/modules/2.4.20-8/misc/wcte11xp.o: post-install wcte11xp failed
/lib/modules/2.4.20-8/misc/wcte11xp.o: insmod wcte11xp failed
[EMAIL PROTECTED] root]# modprobe wcfxo
ZT_CHANCONFIG failed on channel 25: Invalid argument (22)
Did you forget that FXS interfaces are configured with FXO signalling
and that FXO interfaces use FXS signalling?
/lib/modules/2.4.20-8/misc/wcfxo.o: post-install wcfxo failed
/lib/modules/2.4.20-8/misc/wcfxo.o: insmod wcfxo failed
[EMAIL PROTECTED] root]#
What's wrong with configuration?
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
