I have the following in my extensions.conf
[ext-local]
exten => _53XX,1,Wait(2)
exten => _53XX,2,NoOp,Dialing ${EXTEN} from ext-local-custom
exten => _53XX,3,Macro(dialout-trunk,2,${EXTEN},,)
This is used to match inbound caller-id for my legacy PBX.
It works fine for inbound calls, but not for internal SIP calls.
If I call from a SIP phone that is also in [ext-local], it looks like it is
calling, but never connects.
excerpt from log when called from pstn zap PRI:
Apr 28 14:18:16 VERBOSE[28452] logger.c: -- Called g2/5386
Apr 28 14:18:16 DEBUG[28452] channel.c: Set channel Zap/27-1 to read format slin
Apr 28 14:18:16 DEBUG[28452] channel.c: Set channel Zap/2-1 to write format slin
Apr 28 14:18:16 DEBUG[28452] channel.c: Set channel Zap/2-1 to read format slin
Apr 28 14:18:16 DEBUG[28452] channel.c: Set channel Zap/27-1 to write format
slin
Apr 28 14:18:16 DEBUG[11073] devicestate.c: Changing state for Zap/27 - state 2
(In use)
Apr 28 14:18:16 DEBUG[28457] app_queue.c: Device 'Zap/27' changed to state '2'
(In use)
Apr 28 14:18:17 DEBUG[11111] chan_zap.c: Enabled echo cancellation on channel 27
Apr 28 14:18:17 DEBUG[11073] channel.c: Avoiding initial deadlock for 'Zap/27-1'
Apr 28 14:18:17 VERBOSE[28452] logger.c: -- Zap/27-1 is ringing
excerpt from log when called from internal SIP extension:
Apr 28 14:18:25 VERBOSE[28477] logger.c: -- Called g2/5386
Apr 28 14:18:25 DEBUG[28477] channel.c: Set channel Zap/27-1 to read format ulaw
Apr 28 14:18:25 DEBUG[28477] channel.c: Set channel SIP/5665-e60f to write
format ulaw
Apr 28 14:18:25 DEBUG[28477] channel.c: Set channel SIP/5665-e60f to read
format ulaw
Apr 28 14:18:25 DEBUG[28477] channel.c: Set channel Zap/27-1 to write format
ulaw
Apr 28 14:18:25 DEBUG[28482] app_queue.c: Device 'Zap/27' changed to state '2'
(In use)
Apr 28 14:18:25 DEBUG[28477] rtp.c: Ooh, format changed from unknown to ulaw
I never get a ringing log entry if dialed from SIP.
This SIP phone can call other extensions in asterisk as well as native
(voicemail) and PSTN calls out ZAP/g0.
I have tried various dial strings ( like the Dial command instead of the macro)
and they all work for incoming PSTN calls and not
for SIP.
I am at a loss where to find the problem.
Please advise.
--
--
Steven
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
