On Tue, 2006-05-09 at 02:03 +0800, Kenige Ho wrote: > Dear All, > > I was wondering will there be any problems or changes that I will need > to do to compile the current > Asterisk(1.2.7)/Zaptel(1.2.5)/Libpri(1.2.2) source from > www.asterisk.org into a 64-bit binaries? I am currently using the > following hardware for my new server. > > CPU: Pentium D 930 3.0 GHz > Mobo: Intel D945PSN Motherboard > RAM: 512MB 533MHz DDR-2 > Drive: SATA II Seagate 160GB > Card: TE406 Digium Card > OS: Fedore Core 5
Although I don't have any experience with your particular hardware, afaik there is no issue with building and running zaptel, libpri and asterisk on x86_64 hardware. Works fine for many. You can find (S)RPMs at http://atrpms.net and at http://www.laimbock.com/asterisk/ If you search on http://voip-info.org there are more places where you can find packages for FC5. If I may make a suggestion: have you thought about getting another harddisk and run the two in a RAID1 setup? The cost of the extra harddisk versus the cost of being down on a 4 span card is something probably worth considering. Regards, Patrick _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users