I have been having a strange issue with my Asterisk 1.2.1 server. I have a TDM400 for the three POTS lines I have and I can receive calls without any problems. But sometimes (not everytime, but 70%) when I dial out of those lines it drops a number and of course gives me the telco error message. How do I know that it's dropping? Because I thought it was a line problem and the tech came out and found nothing wrong and we could dial out with a phone and have no problem. I asked the tech to trap the line while we dialed out from Asterisk and he found that on the 10 digit dialing that sometimes only 8 or 9 digits were being passed to the telco switch.
Asterisk is probably starting to dial too fast. Add a "w" in your dial statement, this will make it wait half a second before dialing, giving the time for the dialtone to appear. You can add multiple "w" to have it wait longer On the asterisk CLI, type "show application dial" hth _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
