On Wednesday 10 May 2006 16:02, Woodoo People .pGa! wrote: > Straight cable for TE mode and Xover for NT mode > you have to make a call, than L1 should go up
I connected the card to ISDN provider's equipment via crossover cable, but portinfo report: Port 1: TE-mode BRI S/T interface line (for phone lines) -> Protocol: DSS1 (Euro ISDN) -> Layer 4 protocol 0x04000001 is detected, but not allowed for TE lib. -> childcnt: 2 * Port NOT useable for PBX What is not useable for PBX, the ISDN line or my ISDN card? hfcpci is loaded with this command: modprobe hfcpci layermask=0x3 protocol=0x32 type=0x01 Thanks -- Serghei. _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
