Hi i'am again, here my zapata.conf:
span=1,0,0,ccs,hdb3,crc4 span=2,0,0,ccs,hdb3,crc4 span=3,0,0,ccs,hdb3,crc4 span=4,0,0,ccs,hdb3,crc4 bchan=1-15,17-31 dchan=16 bchan=32-46,48-62 dchan=47 bchan=63-77,79-93 dchan=78 bchan=94-108,110-124 dchan=109 loadzone = fr defaultzone=fr If i comment out the span,bchan and dchan values and then ztcfg works. But this is naturally not wished ;-) Any ideas (agian...) ? Regards, Thomas. -----Urspr�ngliche Nachricht----- Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Auftrag von Thomas Haeger Gesendet: Mittwoch, 29. Oktober 2003 14:05 An: [EMAIL PROTECTED] Betreff: AW: [Asterisk-Users] probs with loading tor2 and wcusb Ok, meanwhile i loaded the tor2 driver with insmod (previous loaded slhc, ppp_generic,zaptel) this works, but when i execute ztcfg the machine is freezed! Now any ideas ? Thanks, Thomas. -----Urspr�ngliche Nachricht----- Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Auftrag von Thomas Haeger Gesendet: Mittwoch, 29. Oktober 2003 12:32 An: Asterisk User Betreff: [Asterisk-Users] probs with loading tor2 and wcusb Hi all, i tried to load the tor2 driver for the E400P with modprobe tor2 on a P4 2,7Ghz machine. and everything seems to be ok. but after load (after the kernel messages) the machine is freezed. And then i have to reset the whole machine. The same is happend when i try to load the wcusb driver on a VIA EPIA 5000 machine. Any ideas ? Thanks, Thomas. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
