Hi Dustin- That's interesting! What is the physical setup that you have? IE: Routers, etc Also, where are you located and who is the carrier? I'm interested in setting up a similar channelized T1 here in my office (PacBell-SBC)
Thanks Scott Stingel Scott M. Stingel Emerging Voice Technology Inc. Palo Alto, California and London, England URL: www.evtmedia.com -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of DUSTIN WILDES Sent: Wednesday, October 29, 2003 2:23 PM To: [EMAIL PROTECTED] Subject: RE: [Asterisk-Users] FW: Voice/Data mixed routing over Digium E1/T1 Card I'm currently using this setup for a channelized T1 for voice and data. First 9 channels of the T1 are voice - the rest are data for internet. Works extremely well! This is being used for a production server that receives/places around 500 calls per day. -----Original Message----- From: Ray Burkholder [mailto:[EMAIL PROTECTED] Sent: Wednesday, October 29, 2003 9:01 AM To: [EMAIL PROTECTED] Subject: [Asterisk-Users] FW: Voice/Data mixed routing over Digium E1/T1 Card The documentation mentions that the Digium channels can be split into some voice channels and the remainder of the channels used for routing IP traffic. Does any one have this in use in conjunction with Asterisk? Does it work well? Would you recommend it for a production server? Obviously, if this works, this makes for a cost effective platform where you obtain one E1/T1 to a provider, and they can provide TDM and data over the one circuit. No separate router required. Ray Burkholder [EMAIL PROTECTED] http://www.oneunified.net 704 576 5101 -- Scanned for viruses & dangerous content at One Unified and is believed to be clean. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
