For BT in the UK I use :- zaptel.conf loadzone = uk defaultzone=uk span=1,1,0,ccs,hdb3,crc4 bchan=1-15 dchan=16 bchan=17-31
zapata.conf [trunkgroups] [channels] language=en context=did priindication = outofband usecallerid=yes cidsignalling=v23 usecallingpres=yes sendcalleridafter=1 switchtype = euroisdn pridialplan=unknown signalling = pri_cpe group = 1 channel => 1-15 channel => 17-31 overlap=yes On Fri, 2006-05-12 at 08:34, Koen Van Impe wrote: > Hi, > > I wonder if anyone is using Digium's TE110P card on an E1 connection. > I have been try to, but so far it wasn't much of a success. > It only works more or less in EuroISDN as PRI CPE. > And even that config gives me some trouble with channel negotiation. > > My current config: > zaptel.conf: > span=1,1,0,ccs,hdb3 > bchan=1-15,17-31 > dchan=16 > loadzone=be > defaultzone=be > > zapata.conf: > [trunkgroups] > trunkgroup => 1,16 > spanmap => 1,1,1 > > [channels] > context=incoming-pri > switchtype=euroisdn > pridialplan=national > prilocaldialplan=national > signalling=pri_cpe > group=1 > channels => 1-15,17-31 > > I have tried EuroISDN and QSIG in both NET and CPE, without much > success. > From traces of D-channel messaging, I think there's a problem with > channel negotiation. > The information element (IE) involved only shows 5 bytes coming from > our PBX. > But Asterisk (Zaptel) uses 6 bytes. From pri debug messages on > Asterisk, I see that it adds a "DS1 Identifier". > I haven't seen that in other d-channel traces between other systems. > > Anyone with experience on this matter??? > > Regards, > > Koen > > ______________________________________________________________________ > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users