thanks for your replay, after i disallow all codec except g723 i also confused how a2billing is working then what i did , i removed all the codec from /usr/lib/astersik/module without codec_g723.so .
then i saw in my log while user calling to my ivr access number a2b is looking for gms codec as all the audio file is in gsm format. but what my understanding was it should drop the connection as i only allow g723 . what is found today from one of my frnd telling me that actual bandwidth calculation " For codec g723 incoming and g723 outgoing we need: 48.89kbps For codec g723 incoming and g711 outgoing we need: 114.03kbps So, to run 8 calls we will require 902.15 kbps or 0.9 mbps For 10 calls we need 1140.3 kbps or 1.1mbps Each call has RTP, UDP, IP, Codec and SIP overhead. " so what u guys suggest , should i record all my ivr file in g723 format all . increase my bandwidth! /Salaque On 5/14/06, AR Tarzi <[EMAIL PROTECTED]> wrote:
Unless "reinviting" works, wouldn't that add up to what he's experiencing ? client <-> asterisk <-> service provider.. makes that 180k each connection so 4 of them would give 800k or so. What I can't understand is: if only g723 is allowed, and Asterisk only allows it as passthrough, how's the A2billing IVR working ? I have to assume G711 (ulaw or alaw) is used. ----- Original Message ----- From: "Woodoo People .pGa!" <[EMAIL PROTECTED]> To: "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users@lists.digium.com> Sent: Saturday, May 13, 2006 23:36 Subject: Re: [Asterisk-Users] Confused ! > Install iptraf, that will allow you to check incoming and outgoing traffic > (or trafshow what do that on /host basis, but not so detailed info) > > If you choose ulaw, that should take about 90kbps fullduplex traffic. > >> I'd like to share something u all , so that i could understand whats >> going on into my Asterisk box. >> >> i have a setup like this >> >> >> client(ip phone) -----ip network------- [Asterisk]----ip network >> -------[Service provider] >> >> i have configured A2biling in my Asterisk box. so when client call to >> my Asterisk >> A2billing's ivr respoce , my client authenticate there pin and call . >> >> all my IVR file is gsm format (i got that from a2billing by default) >> i configured each client >> >> >> disallow=all >> context=from-internal >> canreinvite=no >> callerid=device <20004> >> allow=g723 >> >> so client is only using g723 i think.. >> >> but the problem i am facing now . when there are 4 calls in my server >> i saw my bandwidth reach around 1 mbps /1 mbps . why my server taking >> so much bandwidth ? > > -- > WoodOO-[P]an[G]alaktikan[A]gent-People <][> http://shadow.pganet.com > [EMAIL PROTECTED]@RedHat.users > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
-- Got my Gmail ? _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users