Hi!
Is there anyone that are using a E1-channelbank and have any tips about some type? Im looking at the TE410P and use one port for a PRI (Euro-ISDN, I think we're using some slightly modified version here in Sweden, but I'll check that tomorrow) and connect one port to a channelbank for 30 analogue telephones.
It would also be great to get callerid on the analogue phones, so it would be intresting to know how the channelbank sends the callerid (DTMF or FSK) if it sends any callerid?
Best regards, Lars Fredriksson
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
Just remember part of the design of the TE410P is that you can use T1 channel banks (you only get 24 ports) , if you buy these in America they are significantly cheaper than E1 channel banks. Just assign one of the incoming ports on the TE410P to be T1 not E1.
Peter
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
