there have 30 channel for voice, and 1 channle for signal, 1 channel for clock.

On 5/16/06, HaoXu <[EMAIL PROTECTED]> wrote:
Hi steven,
 
I am from China. we have many E1 gateway running in China including ShangHai.
 
In your case, it is impossible to negociate with ShangHai Telecom. To debug the E1 link problem, why not use a PBX or E1 trunk gateway to test the link first. We have successfully used the E1 gateway work with asterisk in ShangHai. What's your card type?
 
Hawk


From: [EMAIL PROTECTED] [mailto: [EMAIL PROTECTED]] On Behalf Of 陈帆
Sent: Tuesday, May 16, 2006 5:00 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] PRI in Shanghai China

 
steven,,
 
u not understand the situation,,,
there only have 30 channel for voice,, the other channel resiverd for control channel..
 
good luck for you.

 
On 5/10/06, Steve Underwood <[EMAIL PROTECTED] > wrote:
陈帆 wrote:

> there have only 30 channel for E1,,

He has defined the correct 30 channels for his E1.

> On 5/10/06, *Steve Underwood* <[EMAIL PROTECTED]
> <mailto: [EMAIL PROTECTED]>> wrote:
>
>     Edwin Lam wrote:
>
>     > hi folks.
>     >
>     > does any one have experience setting up E1 PRI in Shanghai, China?
>     > it works fine when we use SIP phone to dial out, however when
>     > using forward function on the same phone, it seems like it's dialing
>     > out but there's actually no respond from the phone company (China
>     > Telecom)
>     > and eventually the dial command will timed out.
>     >
>     > here's our PRI portion of zapata.conf:
>     >
>     > switchtype=euroisdn
>     > nsf=none
>     > pridialplan=unknown
>     > internationalprefix = 00
>     > nationalprefix = 0
>     > localprefix = privateprefix = unknownprefix =
>     > signalling=pri_cpe
>     > hidecallerid=no
>     > usecallingpres=yes
>     > callerid=asreceived
>     > channel => 1-15
>     > channel => 17-31
>     >
>     > any clues?
>
>     China Telecom can be very fussy about getting the TON and NPI values
>     right, and some installations simply fail to respond to things they
>     don't like. As with all telcos, if things don't work properly asking
>     China Telecom to help is usually a frustrating task.
>
>     Steve
>
>
> --
> Jeffery


_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users



--
Jeffery

iaxtel Num: 1-700-576-1311
fwdnet Num: 728150



--
Jeffery

iaxtel Num: 1-700-576-1311
fwdnet Num: 728150
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to