Jonathan Gonzalez wrote:
I'm thinking buy only de SBC and look for another chassis where all equipment fit fine. I say you don't cover, or this i think, because i need to use FXO<->PBX<->FXS/SIP and you don't use this setup.
Don't attempt to use a Digium or other FXO and FXS card on a soekris board, especially if you plan on using a full-featured distribution like CentOS (which is what AAH uses). See more below...
You call forward all calls over an ip-to-pstn account while i want to receive incoming calls via pstn and call from internal sip phones to sip phones and to pstn trhu asterisk (of course, paying for the call, like a normal call). Another difference is that you use CF with the SBC, while i want to use the mini-hard disk option and make a complete installation of [EMAIL PROTECTED]
If you are going to use a hard drive AND an FXS/FXO card (assume TDM11B), you'd be happier using an EPIA board. If you need dual ethernet ports, go with the PD10000. If not, the V10000 would work fine as well.
It seems the product is quite stable and i couldn't see this about astlinux in any place. I would appreciate your thougts about astlinux and some recomendations will be welcomed.
For information about AstLinux, go to http://www.astlinux.org Note that there have been some pretty substantial changes in the past month and some of the documentation hasn't quite caught up to the 0.4.0 image.
Darrick -- Darrick Hartman DJH Solutions, LLC http://www.djhsolutions.com _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
