Thanks for the feedback, but the route that that I'm finding doesn't
work is:
Asterisk -> SPA3000 -> ZAP/BRI -> Asterisk -> DISA
The problem appears to be on outbound calls from the SPA3000 where the
second dial tone seems to stop audio transmission, changing the DTMF
method make no difference. :(
Thanks
Dave Hawkes
Philippe Lindheimer wrote:
Just tried it on mine, worked fine:
Cellphone Call -> POTS -> SPA3000 -> Asterisk -> DISA -> Telasip
As an FYI, I have my SPA3000 setup with INFO for the DTMF. When I
originally installed it, I couldn't get the DTMF digits to work coming
in using AUTO, which is why I have it using INFO (needs to be set on
both the SPA and in Asterisk).
I'm running the SPA300 with Software Version: 2.0.13(GWg), Hardware
Version 2.0.1(4e16).
philippe
From: Dave Hawkes <[EMAIL PROTECTED]>
To: [email protected]
Date: Wed, 17 May 2006 13:44:43 -0400
Subject: [Asterisk-Users] Re: DISA & SPA3000 issues
I have this exact same issue with the SPA3000, I'm assuming it
must be a
SPA3000 bug?
Dave Hawkes
Alchaemist wrote:
> Hi,
>
> These days I run into something quite odd.
> I have an [EMAIL PROTECTED] that was modified to meet our
requirements.
> We have a completely funtional DISA which we use pretty much
all the
> time.
> I works flawlessly with incomming SIP calls from several
providers,
> IAX calls from FWD and with ZAP.
>
> Recently we came out with a situation where it doesn't
work... with
> a SPA3000 PSTN Line.
> You can call, navigate de IVR, log in into our app, and then
when
> you go to DISA, and DISA plays the dialtone... whatever you
dial is not
> recognized...
>
> This was REALLY odd... so I made a network capture with
Ethereal,
> and... the SPA actually STOPS sending the RTP Events after
the second
> dialtone...
>
> To verify this, I created an IVR which played the dialtone, and
> verified that it was true.... no RTP DTMF events (RFC2833)
are sent after
> the SPA listens the second dialtone.
>
> I just reviewed the 87 pages PDF of the SPA3000... and didn't
find
> anything about such "feature".
> Now I am going to try to figure out if it has something to do
with
> the tones recognition of the SPA.
> I the meanwhile I had to write a little DISA-like app, based on
> something I found on this forum, without the dialtone.
>
> Did anyone find out anything about this issue before?
>
> REGARDS!!!
> Alchaemist
>
>
>
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
------------------------------------------------------------------------
Feel free to call! Free PC-to-PC calls. Low rates on PC-to-Phone. Get
Yahoo! Messenger with Voice
<http://us.rd.yahoo.com/mail_us/taglines/postman10/*http://us.rd.yahoo.com/evt=39663/*http://messenger.yahoo.com>
------------------------------------------------------------------------
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
