Ok, eventually I gave up on the version of asterisk in Ubuntu breezy 1:1.0.9.dfsg-1 and compiled it from CVS (asterisk, libpri and zaptel driver) and all problems went away. It just looks like the code included in Breezy is a bit broken.
Thanks for all the help. Pieter On Wednesday 17 May 2006 13:24, M.Masri wrote: > The correct module to load for a TDM Cards interface is wctdm > see http://www.digium.com/en/docs/misc/quick_install_zaptel_asterisk.pdf > > > Regards, > > Moutaz > > > ---------- Original Message ----------- > From: Pieter Claassen <[EMAIL PROTECTED]> > To: Asterisk Users Mailing List - Non-Commercial Discussion <asterisk- > [EMAIL PROTECTED]> > Sent: Wed, 17 May 2006 12:17:56 +0200 > Subject: Re: [Asterisk-Users] Netherlands zaptel.conf > > > On Wednesday 17 May 2006 08:48, Florian Overkamp wrote: > > > Michiel van Baak wrote: > > > > If you load the wcfxs module and everything works (cept for > > > > the asterisk answering the phoneline) all is correct. > > > > wcfxs is for connecting an analog phone, not a PSTN > > > > connection. I think you have the wrong module on you > > > > wildcard to interface with the PSTN net. > > > > > > > > Sorry. > > > > > > Whoa, good call! I totally ignored that options. > > > Pieter, what color is the module ? > > > > > > S110M = Green (for a phone device) > > > X100M = Red (for a phone line) > > > > The module is red and plugged into the UPC line (phone line). > > I also moved the module from the 4th slot on the card to the first > > slot. I plugged a power source from the motherboard into the card > > (not sure if it is needed). > > > > So, it looks like I have the right module installed. > > > > Is the wcfxs the correct module to load for a fxo interface? > > > > Any further comments appreciated. > > > > Pieter > > > > [EMAIL PROTECTED]:~ # lsmod |grep zap > > zaptel 225284 1 wcfxs > > crc_ccitt 2176 2 hisax,zaptel > > [EMAIL PROTECTED]:~ # ztcfg -vv > > > > Zaptel Configuration > > ====================== > > > > Channel map: > > > > Channel 01: FXS Kewlstart (Default) (Slaves: 01) > > > > 1 channels configured. > > _______________________________________________ > > --Bandwidth and Colocation provided by Easynews.com -- > > > > Asterisk-Users mailing list > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > ------- End of Original Message ------- > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
