Hi, I have a TDM400P and it works, Send us the output of your "dmesg" command.
Regards. --- "M.Hockings" <[EMAIL PROTECTED]> a écrit : > In my attempt to setup a single FXS line I have been > following the > instructions for "Telephony Card Drivers" on the > asteriskdocs.org site. > I have managed to checkout, make and install the > zaptel code and can > load the zaptel module but when I attempt to load > the wcfxs module it > tells me: > > ZT_CHANCONFIG failed on channel 1: No such device > or address (6) > FATAL: Error running install command for wctdm > > On the card the single FXS module is in the position > at the back of the > TDM400P (i.e., closest to the connectors) > > In the /etc/zaptel.conf file I have put the > following at the bottom of > the file: > > fxoks=1 > loadzone=us > defaultzone=us > > I have also tried fxoks=4 with the same results > other than that the > channel number changes in the message. > > Any idea what I am configuring incorrectly ? > > Mike > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com > -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > ___________________________________________________________________________ Faites de Yahoo! votre page d'accueil sur le web pour retrouver directement vos services préférés : vérifiez vos nouveaux mails, lancez vos recherches et suivez l'actualité en temps réel. Rendez-vous sur http://fr.yahoo.com/set _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
