In article <[EMAIL PROTECTED]>,
Tomislav Parèina <[EMAIL PROTECTED]> wrote:
> Hi list!
>
> I'm trying to setup Digium TE205P E1 card to work with my provider (and
> Ericsson BP 250 -
> this comes later). When I execute "pri show span 1" this is what I get.
>
> pbxzg1*CLI> zap show status
> Description Alarms IRQ bpviol CRC4
> T2XXP (PCI) Card 0 Span 1 OK 0 0 0
> T2XXP (PCI) Card 0 Span 2 UNCONFIGUR 0 0 0
> pbxzg1*CLI> pri show span 1
> Primary D-channel: 16
> Status: Provisioned, Down, Active
> Switchtype: EuroISDN
> Type: CPE
> Window Length: 0/7
> Sentrej: 0
> SolicitFbit: 0
> Retrans: 0
> Busy: 0
> Overlap Dial: 0
> T200 Timer: 1000
> T203 Timer: 10000
> T305 Timer: 30000
> T308 Timer: 4000
> T313 Timer: 4000
> N200 Counter: 3
>
> Notice "Status: Provisioned, Down, Active". This "Down" is what I'm woried
> about. I have
> search list and Internet and explanation I could find is that my D channel is
> down (for some
> reason). I have put jumpers for E1 (1-2 and 3-4 are connected). And those are
> mine
> extensions, zaptel and zapata conf files.
>
> extensions.conf
>
> include => pomoc
> exten => _0.,1,NoOp(${CALLERID(name):0:4})
> exten => _0.,n,NoOp(${CALLERID(number)})
> exten => _0.,n,GotoIf($["${CALLERID(name):0:4}" = "Lama"]?4:6)
> exten => _0.,n,Dial(Zap/g1/${EXTEN:1},60,TW) ; W - calling user to start
> recording *1
> exten => _0.,n,Hangup
> exten => _0.,n,Set(CALLERID(name)=Vanjski poziv)
> exten => _0.,n,Set(CALLERID(number)=100)
> exten => _0.,n,Dial(Zap/g1/${EXTEN:1},60,tw) ; w - caled user to start
> recording *1
> exten => _0.,n,Hangup
>
> zaptel.conf
>
> span=1,1,0,cas,hdb3 # koristiti ovo - da se koristi telco's clock as timing
> source for the card
> bchan = 1-15,17-31
> dchan = 16
> loadzone = it
> defaultzone = it
>
> zapata.conf
>
> [channels]
> context=zap-in
> switchtype=euroisdn
> pridialplan=unknown
> prilocaldialplan=unknown
> usecallerid=yes
> hidecallerid=no
> callwaiting=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> cancallforward=yes
> echocancel=yes
> rxgain=0.0
> txgain=0.0
> group=1
> callgroup=1
> pickupgroup=1
> immediate=no
> callprogress=no
> callerid=asreceived
> group=1
> signalling=pri_cpe ; pri_cpe - kad se povezujem s provjaderom, pri_net kad
> sam ja provider (dva asteriska)
> channel => 1-15,17-31
>
> When I call out this is what I see on CLI
There is no point trying to make calls until the PRI status changes from
"Down" to "Up".
In zaptel.conf, you need to change the span from cas to ccs - that might
be enough to fix the problem. ISDN protocol always uses ccs, not cas.
You will need to shutdown asterisk and zaptel, make the change, then
start zaptel and asterisk. Or else just reboot after making the change.
If you then get messages saying the other end thinks its is a CPE,
you will also need to change signalling=pri_cpe to signalling=pri_net
in zapata.conf and restart asterisk.
Cheers
Tony
--
Tony Mountifield
Work: [EMAIL PROTECTED] - http://www.softins.co.uk
Play: [EMAIL PROTECTED] - http://tony.mountifield.org
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
