On Tue, 2006-05-23 at 06:27 -0400, Steve Totaro wrote: > Greg Oliver wrote: > > I am trying to set CIDNum to nothing, but my outgoing PRI controlled by > > another PBX seems to fill in something when asterisk does not.. If I > > set a number either in the sip channel for the phone, or from > > extensions.con, it is realized.. If I try to leave them blank, or even > > Not Defined, the main number of the pri gets sent out.. > > > > I am trying to debug a glitvh in or software and I need to be able to > > make a test call with unknown (blank callerid).. I can successfully set > > it to private, but that is not the same.. > > > > Any ideas? > > > > TIA > > > > -Greg > > > > > > On one of my T1 circuits, ten digits always appear on the other side. I > can set all ten digits to zero. If I set less than ten digits then the > last digits of the default ten digit string (which is our billing phone > number) are overwritten with what is set. On our T3 (different > provider), we can set any length of digits but I have never tried to > send blank or null values. > > Does your other PBX send blank callerID? Is the PRI from the same > provider? When you have CIDNum= do you see errors in the log that the > value must not be null?
Unfortunately not - if I fill in anywhere up to the 40 digit max in *, then the other PBX allows it, but anything that is not valid, it rejects and puts the main hunt number in.. I think I am kind of screwed thanks to the 800lb gorilla Cisco.... Gotta love 'em. -Greg _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users