Hi On Wed, May 24, 2006 at 12:16:16PM +0200, Shenen Shenen wrote: > Hi!I've a problem with asterisk,it doesn't start..it's stopped..I used the > amportal start command and this is the result: > > SETTING FILE PERMISSIONS > Permissions OK > > STARTING ASTERISK > Asterisk ended with exit status 1 > Asterisk died with code 1. > Automatically restarting Asterisk. > Asterisk ended with exit status 1 > Asterisk died with code 1. > Automatically restarting Asterisk. > > ----------------------------------------------------- > Asterisk could not start! > Use 'tail /var/log/asterisk/full' to find out why. > --------------------------------------------------- > > if use the tail comand this is the result: > > ----------------------------------------------------- > Asterisk could not start! > Use 'tail /var/log/asterisk/full' to find out why. > ----------------------------------------------------- > [EMAIL PROTECTED] ~]# tail /var/log/asterisk/full > May 23 04:06:36 VERBOSE[4327] logger.c: [chan_features.so]May 23 04:06:36 > VERBO SE[4327] logger.c: > [chan_features.so] => (Feature Proxy Channel) > May 23 04:06:36 VERBOSE[4327] logger.c: == Registered channel type > 'Feature' ( Feature Proxy > Channel Driver) > May 23 04:06:36 VERBOSE[4327] logger.c: [chan_zap.so]May 23 04:06:36 > VERBOSE[43 27] logger.c: > [chan_zap.so] => (Zapata Telephony w/PRI) > May 23 04:06:36 VERBOSE[4327] logger.c: == Parsing > '/etc/asterisk/zapata.conf' : > May 23 04:06:36 VERBOSE[4327] logger.c: == Parsing > '/etc/asterisk/zapata.con f': > Found > May 23 04:06:36 WARNING[4327] config.c: Unknown directive 'switchtype' at > line 9 of zapata.conf > May 23 04:06:36 WARNING[4327] config.c: Unknown directive 'overlapdial=yes' > at l ine 22 of zapata.conf > May 23 04:06:36 ERROR[4327] chan_zap.c: Unknown signalling method > 'bri_net_ptmp' > May 23 04:06:36 ERROR[4327] chan_zap.c: Signalling must be specified before > any channels are. > May 23 04:06:36 WARNING[4327] loader.c: chan_zap.so: load_module failed, > returni ng -1 > May 23 04:06:36 WARNING[4327] loader.c: Loading module chan_zap.so failed! > > > I've a Digium Wildcard TE110P TE/E1 card 0 and in the /ect/zaptel.conf the > configuration is the following: > > # Autogenerated by /usr/local/sbin/genzaptelconf -- do not hand edit > # Zaptel Configuration File
First off, there is a newer version of it in http://svn.digium.com/svn/zaptel/trunk/xpp/genzaptelconf That version can actually pick up your T1 card (bug reports are welcome) > # > # This file is parsed by the Zaptel Configurator, ztcfg > # > > # It must be in the module loading order > > > # Span 1: WCT1/0 "Digium Wildcard TE110P T1/E1 Card 0" > # channel 1, WCT1, unhandled for now > # channel 2, WCT1, unhandled for now > # channel 3, WCT1, unhandled for now > # channel 4, WCT1, unhandled for now > # channel 5, WCT1, unhandled for now > # channel 6, WCT1, unhandled for now > # channel 7, WCT1, unhandled for now > # channel 8, WCT1, unhandled for now > # channel 9, WCT1, unhandled for now > # channel 10, WCT1, unhandled for now > # channel 11, WCT1, unhandled for now > # channel 12, WCT1, unhandled for now > # channel 13, WCT1, unhandled for now > # channel 14, WCT1, unhandled for now > # channel 15, WCT1, unhandled for now > # channel 16, WCT1, unhandled for now > # channel 17, WCT1, unhandled for now > # channel 18, WCT1, unhandled for now > # channel 19, WCT1, unhandled for now > # channel 20, WCT1, unhandled for now > # channel 21, WCT1, unhandled for now > # channel 22, WCT1, unhandled for now > # channel 23, WCT1, unhandled for now > # channel 24, WCT1, unhandled for now > > # Span 2: ZTDUMMY/1 "ZTDUMMY/1 1" > > # Global data > > loadzone = us > defaultzone = us > ~ > > in /var/aah_load/zaptel.conf I've this: > > # > # Zaptel Configuration File > # > # This file is parsed by the Zaptel Configurator, ztcfg > > fxsks=1 > loadzone = us > defaultzone=us But here I see just a single X100P card. What hardware do you catually have? cat /proc/zaptel/* > ~ > We're is the problem?HELP ME PLEASE!!! > 10000000000000 thanks!!! That sort of shouting generally gets you less and later naswers, BTW. -- Tzafrir _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
