I recommended simple Meetme conference bridge http://www.voip-info.org/wiki-Asterisk+cmd+MeetMe
Arjan Kroon -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Álvaro Palma Sent: woensdag 24 mei 2006 16:36 To: [email protected] Subject: [Asterisk-Users] Generate two calls from Asterisk and bridge them Is there a way in Asterisk (I guess there's, it's only I can't figure out how :-)) to: 1.- Generate a call to channel 1 (example, to PSTN vía an E1 card, using Zap/g1) 2.- Generate a call to channel 2 (example, an internal SIP extension). 3.- Once both channel have answered, connect the call between them. This way, I can, for example, play audios in both channels before they are connected between each other. So my question is: Does anybody figures out a way to do this? If I use Manager/Originate, the call necesarily needs a channel to be picked up (the originating channel) before the call can be placed. What I'd like to do is: Asterisk -> Channel 1 and do something in channel 1 Asterisk -> Channel 2 and do something in channel 2 Bridge both channels: Channel 1 <----> Channel 2 Is maybe "Local" the solution? Thanks a lot for your help. -- Atly. Alvaro Palma _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
