Guys,
I'm trying to configure a TE406P with MFC/R2.
here goes my zaptel.conf:
span=1,0,0,ccs,hdb3,crc4
cas=1-15:1101
dchan=16
cas=17-31:1101
span=2,0,0,ccs,hdb3,crc4
cas=32-46:1101
dchan=47
cas=48-62:1101
The first strange behavior is that the:
zap show status
shows this:
Description Alarms IRQ
bpviol CRC4
T4XXP (PCI) Card 0 Span 1 OK 0 0 0
T4XXP (PCI) Card 0 Span 2 OK 0 0 0
T4XXP (PCI) Card 0 Span 3 OK 0 0 0
T4XXP (PCI) Card 0 Span 4 UNCONFIGUR 0 0 0
How is it possible? Since i just configure 2 spans!
And the second problem is that when I try to place a call I receive this:
-- AGI Script Executing Application: (Dial) Options:
(UniCall/g1/096213788|15|gS(600))
-- Setting call duration limit to 600 seconds.
May 24 15:13:43 NOTICE[5530]: app_dial.c:1029 dial_exec_full: Unable to
create channel of type 'UniCall' (cause 0 - Unknown)
== Everyone is busy/congested at this time (1:0/0/1)
How can I solve this? Or at least debug what is the problem.
Thanks in advance.
Fernando Lujan
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
