You will have far better luck asking this in the AAH forum or the FreePBX site. -Kerry
> -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > Michael George > Sent: Wednesday, May 24, 2006 1:42 PM > To: [email protected] > Subject: [Asterisk-Users] latest @Home questions > > We are moving our asterisk 1.0 system to a new Asterisk @Home > system (2.8) and I am the one in charge of doing it. > > I have run into a snag, though, on meetme conferences and > with the transfer key. > > Regarding the transfer, it appears that both directions of > all calls can transfer by pressing the # key. I do not like > that ability. I would like to change it by doing 2 things: > > 1. Make the transfer sequence be ## rather than # > I looked at the features.conf file and it didn't have > an entry for > blindxfer, so I added it. However, # is still the > transfer character > so it doesn't seem to be recognizing the settings from > features.conf. > > 2. Not allow incoming calls to transfer at all. > I've looked at the dial() string on incoming calls and > they do not > contain a t or T like I would expect for the channel to > be able to > transfer. > > As for the meetme conferences, the docs say that for all > extensions defined, there is a meetme conference at 8<ext>. > So extension 250 would have a conference at 8250. This isn't > the case on our installation. > > I went to the Conference menu item and defined a conference > at 1000 and I put an entry into the IVR for incoming callers > to get into the conference and that works fine (except that > after the PIN number, they cannot press # to signal the end > of the PIN -- that will try a transfer). However, I don't > have a way to get to the conference from an extension. > > I think I'm missing something, because meetme setup cannot be > that difficult... > > Thanks for any help anyone can offer. > > -- > -M > > There are 10 kinds of people in this world: > Those who can count in binary and those who cannot. > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
