Hi,
I have a setup where I have multiple lines to the same provider - in
this case broadvoice.
I have created the entries in sip.conf for both accounts - and
independently they work fine. When they both are in use, incomming
calls are placed to the one that's the last in the sip.conf file.
On voip-info I found the following:
| Quote: |
When Asterisk receives an incoming SIP call, the SIP Channel Module
* first tries to find a [user] section matching the caller name
(From: username),
* then tries to find a [peer] section matching the caller's IP address.
* If no matching user or peer is found, the call is sent to the
context defined in the [general] section of sip.conf.
|
This would imply that one had to split the entry into a inbound and an
outbound entry ? Did anyone try this and got it to work ?
Is there anybody that has gotten this to work, such that the
correct context based on the phone number is activated when a call
comes in.
My sip.conf structures are:
| Code: |
[broadvoice-1178]
type=friend
host=sip.broadvoice.com
username=<Number>
fromuser=<Number>
authname=<Number>
fromdomain=sip.broadvoice.com
context=1178-incoming
secret=<secret>
canreinvite=no
insecure=very
;dtmfmode=inband
;dtmf=inband
dtmfmode=rfc2833
dtmf=rfc2833
qualify=0
[broadvoice-4633]
type=friend
host=sip.broadvoice.com
username=<Number>
fromuser=<Number>
authname=<Number>
fromdomain=sip.broadvoice.com
context=4633-incoming
secret=<secret>
canreinvite=no
insecure=very
;dtmfmode=inband
;dtmf=inband
dtmfmode=rfc2833
dtmf=rfc2833
qualify=0
|
Thanks
/S
|
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
