Billy, i you manage to connect them, please let me know...im also in a battle with it and audiocodes support line seems very unhelpful.
On 5/25/06, William Piper <[EMAIL PROTECTED]> wrote:
Thank you for your help, however I still cannot get this thing to connect to asterisk. I followed your instructions to the letter & couldn't get it to connect. I'd be happy to throw it up on a public IP if anyone would like to take a crack at getting it to work. Thanks, bp On 5/24/06, The VoIP Connection <[EMAIL PROTECTED]> wrote: > Here are the step by step instructions for setting up a brand new Audiocodes > FXS gateway for use with an Asterisk server: > > Connect the gateway to a network switch and connect a computer to the same > switch. Then configure the IP address of the computer to 10.1.10.2. Then run > your web browser and point it to http://10.1.10.10 and login using the > information below. > > Default IP address: 10.1.10.10 > Default user name: Admin > Default password: Admin > > Goto "Quick Setup" and change the following: > IP Address => Set to the new IP address of the AudioCodes gateway > Subnet Mask => Set to the correct netmask for your local network > Default Gateway Address => Set to the correct gateway IP address for your > local network > Working With Proxy => Set to "Yes" > Proxy IP Address => Set to the IP address of the Asterisk server > Enable Registration => Set to "Enable" > > Restart the gateway then log back in using the new IP address. > > Goto Protocol Management -> Protocol Definition -> Proxy & Registration > Registrar IP Address => Set to the IP address of the Asterisk server > Registration Time => Set to "60" > Subscription Mode => Set to "Per Endpoint" > Authentication Mode => Set to "Per Endpoint" > > Goto Protocol Management -> Protocol Definition -> DTMF & Dialing > Max Digits In Phone Num => Set to a large enough number such as "32" > > Goto Protocol Management -> Protocol Definition -> Coders > Add coders as needed You need to set at least G.711U-law > > Goto Protocol Management -> Endpoint Settings -> Authentication > Set SIP username and password for each port > > Goto Protocol Management -> Endpoint Phone Numbers > Enter an extension (phone) number for every used channel > > Your AudioCodes gateway is now ready. > > Michael Crown > Managing Partner > www.thevoipconnection.com > 321.989.6728 ext. 611 > sip:[EMAIL PROTECTED] _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
-- ------------------------------------------- Erick Perez Linux User 376588 http://counter.li.org/ (Get counted!!!) Panama, Republic of Panama _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
