I just tested my setup and the GXP2k re-registers according to the registration expiration setting on it's GUI. I tried 1 min, 2 min, and 60 min. It all works as expected after an asterisk reboot.
GXP2k firmware 1.0.2.13, bootloader 1.0.2.3 Asterisk v1.2.7.1 > -----Original Message----- > From: Lacy Moore - Aspendora [mailto:[EMAIL PROTECTED] > Sent: Wednesday, May 24, 2006 1:00 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [Asterisk-Users] GXP2k and BLF problem > > Any chance there is a config file that they are reading? I > know you have configured them manually, but I had a situation > where I kept configuring one of my GXPs manually over and > over, and it just would take the settings. I then found out > I had a config file that it was reading. > > > On 5/24/06, asterisk <[EMAIL PROTECTED]> wrote: > > See response from Grandstream below: > > > > > > Dear neil, > > > > We do not have such problem with * BLF. Please check > your * configuration or consult online * forums. > > > > Best Regards, > > Cindy Li > > Grandstream Technical Support > > > > > > That was helpful wasn't it. We don't have a problem so > your on your own. > > > > Ps. Can someone else check if setting the sip expiry > time has any effect on these phones. Changed the timer to 1 > min on both of my phones and the * console still shows them > logging in with a time of 60. > > > > fadge > > > > > ________________________________ > > > From: [EMAIL PROTECTED] > <mailto:[EMAIL PROTECTED]> > [mailto:[EMAIL PROTECTED] ] On Behalf > Of Lee Archer > Sent: 24 May 2006 13:35 > > > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: RE: [Asterisk-Users] GXP2k and BLF problem > > > > > > Think you need to contact Grandstream support then. > I've got the same version of * and GXP fw and I get no > problems. Sorry I can't help you any further. > > > > Lee > > > > > ________________________________ > > > From: [EMAIL PROTECTED] [mailto: > [EMAIL PROTECTED] > <mailto:[EMAIL PROTECTED]> ] On Behalf > Of asterisk > Sent: 24 May 2006 13:30 > To: 'Asterisk Users Mailing List - Non-Commercial Discussion' > Subject: RE: [Asterisk-Users] GXP2k and BLF problem > > Phone is manually configured through web interface. > > > > Thanks to all those who are helping with this. > > > > Fadge > > > > > ________________________________ > > > From: [EMAIL PROTECTED] > <mailto:[EMAIL PROTECTED]> > [mailto:[EMAIL PROTECTED] ] On Behalf > Of Lee Archer > Sent: 24 May 2006 13:18 > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: RE: [Asterisk-Users] GXP2k and BLF problem > > > > Are you using preconfiged scripts? If so what happens > if you manually config the phone then restart asterisk and > then the phone? > > > > Lee > > > > > ________________________________ > > > From: [EMAIL PROTECTED] [mailto: > [EMAIL PROTECTED] > <mailto:[EMAIL PROTECTED]> ] On Behalf > Of asterisk > Sent: 24 May 2006 12:56 > To: 'Asterisk Users Mailing List - Non-Commercial Discussion' > Subject: RE: [Asterisk-Users] GXP2k and BLF problem > > No, > > Rebooting the phones does not fix the > problem. As previously stated the only way to get them > working again is to default the config of the phone and rebuild. > > > > Fadge > > > > > ________________________________ > > > From: [EMAIL PROTECTED] > <mailto:[EMAIL PROTECTED]> > [mailto:[EMAIL PROTECTED] ] On Behalf > Of Lee Archer > Sent: 24 May 2006 12:41 > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: RE: [Asterisk-Users] GXP2k and BLF problem > > > > I run 1.1.0.13 <http://1.1.0.13/> on my GXP's and > after stopping and starting the server I either wait for the > phones to re-reg or I reboot the phones. After restarting > asterisk does rebooting the phones does fix the problem? > > > > Lee > > > > > ________________________________ > > > From: [EMAIL PROTECTED] [mailto: > [EMAIL PROTECTED] > <mailto:[EMAIL PROTECTED]> ] On Behalf > Of asterisk > Sent: 24 May 2006 12:25 > To: 'Asterisk Users Mailing List - Non-Commercial Discussion' > Subject: RE: [Asterisk-Users] GXP2k and BLF problem > > Phones are configured for "asterisk BLF" . Like I said, > the config works when the phone is defaulted and rebuilt but > stops working if the server is rebooted. Show hints Gives: > > > > -= Registered Asterisk Dial Plan Hints =- > > 310 : SIP/310 > State:Unavailable Watchers 0 > > 305 : SIP/305 > State:Idle Watchers 0 > > 304 : SIP/304 > State:Idle Watchers 0 > > 303 : SIP/303 > State:Idle Watchers 0 > > 302 : SIP/302 > State:Idle Watchers 0 > > 301 : SIP/301 > State:Unavailable Watchers 0 > > ---------------- > > - 6 hints registered > > > > Thanks > > > > fadge > > > > > ________________________________ > > > From: [EMAIL PROTECTED] > <mailto:[EMAIL PROTECTED]> > [mailto:[EMAIL PROTECTED] ] On Behalf > Of Lee Archer > Sent: 24 May 2006 12:01 > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: RE: [Asterisk-Users] GXP2k and BLF problem > > > > Are the GXP's configured properly for BLF and what does > show hints print? > > > > Lee > > > > > ________________________________ > > > From: [EMAIL PROTECTED] [mailto: > [EMAIL PROTECTED] > <mailto:[EMAIL PROTECTED]> ] On Behalf > Of asterisk > Sent: 24 May 2006 11:57 > To: 'Asterisk Users Mailing List - Non-Commercial Discussion' > Subject: RE: [Asterisk-Users] GXP2k and BLF problem > > It does not happen with a reload of asterisk but when > the server is rebooted. I have set the register timeout to 1 > min but this has no effect. The BLF still does not work. The > * is V 1.2.7.1 <http://1.2.7.1/> . I can see the phone > register first time when phone reboots and would expect to > see it re-register every 1 min on the console if I understand > things correctly, but it does not. > > > > Fadge > > > > > ________________________________ > > > From: [EMAIL PROTECTED] > <mailto:[EMAIL PROTECTED]> > [mailto:[EMAIL PROTECTED] ] On Behalf > Of Lee Archer > Sent: 24 May 2006 11:30 > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: RE: [Asterisk-Users] GXP2k and BLF problem > > > > Stopping and restarting Asterisk will lose the hints, > then you will have to wait until the phone registers again. > With 1.2.7.1 <http://1.2.7.1/> a reload shouldn't lose > anything. Change the register time on the phones to > something less that 60 minutes if it's a big problem. > Instead of factory defaulting the phones you might find a > simple restart will re-register the phone and BLF will work > on the phone. > > > > Regards > > > > lee > > > > > ________________________________ > > > From: [EMAIL PROTECTED] [mailto: > [EMAIL PROTECTED] > <mailto:[EMAIL PROTECTED]> ] On Behalf > Of picciuX > Sent: 24 May 2006 10:49 > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [Asterisk-Users] GXP2k and BLF problem > > asterisk version? until 1.2.7.1 <http://1.2.7.1/> , sip > subscriptions get lost on reload of asterisk. In this case, > have to wait until phone re-registers and re-subscribe for BLFs... > > 2006/5/24, asterisk <[EMAIL PROTECTED] >: > > > Hi, > > Is anyone else having problems with the Grandstream > GXP2000 BLF? When I > restart * the status lights stop working but the > buttons still work as one > touch dials and call the correct number. The only way I > cen get the lights > working again is to reset to factory default and > re-build the config. > > I am running I upgraded the firmware to 1.1.0.13 > <http://1.1.0.13/> but still have the same > problem. > > Any ideas ? > > Fadge > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com > <http://easynews.com/> -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > <http://lists.digium.com/mailman/listinfo/asterisk-users> > > > ########################################### > > This message has been scanned by F-Secure Anti-Virus > for Microsoft Exchange. > For more information, connect to http://www.f-secure.com/ > > ########################################### > > This message has been scanned by F-Secure Anti-Virus > for Microsoft Exchange. > For more information, connect to http://www.f-secure.com/ > > ########################################### > > This message has been scanned by F-Secure Anti-Virus > for Microsoft Exchange. > For more information, connect to http://www.f-secure.com/ > > ########################################### > > This message has been scanned by F-Secure Anti-Virus > for Microsoft Exchange. > For more information, connect to http://www.f-secure.com/ > > ########################################### > > This message has been scanned by F-Secure Anti-Virus > for Microsoft Exchange. > For more information, connect to http://www.f-secure.com/ > > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com > <http://easynews.com/> -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > <http://lists.digium.com/mailman/listinfo/asterisk-users> > > > > > > > > -- > Lacy Moore > Aspendora, Inc. > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
