Sounds like a NAT issue. Make sure that in your sip.conf you have nat=yes.
If that doesn't work, connect to a stun server, or DMZ your ATA, or port forward all needed ports to the ATA's internal IP. FYI, on several applications where I set port forwarding... I needed to set nat=no to get it to work. bp -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Miles Scruggs Sent: Thursday, May 25, 2006 11:11 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [Asterisk-Users] pap2 bridging problems I'm having a real problem with one of my linksys pap2. On outgoing calls the callee will ring, but caller (pap2) will not here it ring When the callee answers, no audio is transmitted either way. Asterisk reports the call connected and bridged correctly. Now the kicker is that sometimes it works and other times it doesn't. I have had the most luck calling land lines, but sometime cell phones will work also. If someone could help me out that would be awesome. Miles _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users __________ NOD32 1.1559 (20060525) Information __________ This message was checked by NOD32 antivirus system. http://www.eset.com _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
