On Thu, Oct 30, 2003 at 03:10:09PM -0000, Linus Surguy wrote: > > > > Finally, are my options for handsets limited to IP phones via Ethernet, > > or analogue phones via a channel bank (and then to another Digium E1/T1 > > card), or is there the possibilty to re-use proprietary handsets from a > > previous PBX? > > One option you might not have considered is connect your existing PBX to the > back of Asterisk and thereby use it as a channel bank itself.
And the reverse is possible too, if you buy 2 E100 cards, you can plug your old PABX into the Asterisk server and set up with very minimal config so each proprietry handset can be used with Asterisk. Of course you only get 30 simultaneous connections between the Asterisk and the old PABX per E1 If you are going this route, you should consider a TE410P which will give you future options of T1 channel banks, extra E1 lines etc. -- Woody _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
