Connect to the Asterisk console with verbose turned on and try to dial.
Post that output.
Curt Shaffer wrote:
This is not [EMAIL PROTECTED] it is asterisk with FreePBX only. Yes the phone
line is
connected to the right port. No luck. Thanks.
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of John Novack
Sent: Saturday, May 27, 2006 11:02 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] TDM
Steve Totaro wrote:
Is your machine seeing the card? /var/log/messages? Are you loading
the zaptel drivers? modprobe zaptel, modprobe wctdm?
Would he get the ztcfg message if it were not?
Is the phone line plugged into the correct jack?
With only one module installed, the other three jacks lead to nowhere.
Also this seems to be [EMAIL PROTECTED] from the references, so perhaps
there is a context issue that the configuration files address.
AAH can really lead one down the garden path!
John Novack
Curt Shaffer wrote:
The TDM01B is 4 port capable but has only 1 FXO module. I'm running
asterisk 1.2.7 and zaptel 1.2.5. I cannot seem to get the TDM01B
working. When I do the zttool it shows 4/1/0. I can dial out from a
POTS phone up to the point that the cable plugs into the card.
Here is my /etc/zaptel.conf
loadzone=us
fxsks=1
and here is my /etc/Zapata.conf
[channels]
language=en
#include zapata_additional.conf
context=from-zaptel
signalling=fxs_ks
faxdetect=incoming
usecallerid=asreceived
echocancel=yes
callprogress=no
busydetect=no
echocancelwhenbridged=no
echotraining=800
group=0
channel=>1
When I dial in Asterisk does not even show an initiation of the call.
When I dial out on that trunk I get all circuits busy. Ztcfg -vvv
shows the following
ztcfg -vvv
Zaptel Configuration
======================
Channel map:
Channel 01: FXS Kewlstart (Default) (Slaves: 01)
1 channels configured.
Any help would be appreciated.
Curt
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
