Thanks a lot Wolfgang! I use Dell PE2850, so probably this issue does not directly affect my system. But I will read thread anyway.
What is happening is that under higher load (60 calls, for example) the Asterisk sometimes stops responding in a time manner (AMI messages are delayed, etc). Sometimes also D-Channel goes down and up again. But I'm not sure if this is Sangoma related problem or Asterisk locking issue. Regards! Alex -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Wolfgang Zweimueller Sent: Tuesday, May 30, 2006 1:29 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] E1 hardware for asterisk Hi Alex, "Asterisk" <[EMAIL PROTECTED]> writes: > Wolfgang: What kind of CPU-load issue on A104? Could you give me a > link or something? I also use A104 and it works very good, but > recently I noticed a behavior which is maybe connected with this > issue, so more info would be very helpful for me :) There's a thread regarding this issue in this Mailing list. First Msg-id is: <[EMAIL PROTECTED]>, Subject is: "Experience with IBM X346 machines and Sangoma" This machine is not connected to any line at the moment. So I can not say if this issue makes a real problem. I can give more info next week. What did you observe on your machine? cu, Wolfgang _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
