It looks like they have their own IRQ 10 and 11. cameron.
On Fri, 31 Oct 2003, Sergio Serrano Revuelto wrote: > Try to do cat /proc/pci. You must verify that card doesn't share IRQ > with USB or other component. > > > srsergio > > > > > -----Mensaje original----- > De: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] En nombre de Cameron > Palmer > Enviado el: viernes, 31 de octubre de 2003 8:32 > Para: [EMAIL PROTECTED] > Asunto: RE: [Asterisk-Users] 2 X100Ps give error > > > > RESULTS of your suggestion. I had tried similar variations from the > mailing list archives the result was the same. > > # modprobe wcfxo > ZT_CHANCONFIG failed on channel 2: No such device or address (6) > /lib/modules/2.4.22/misc/wcfxo.o: post-install wcfxo failed > /lib/modules/2.4.22/misc/wcfxo.o: insmod wcfxo failed > > # ztcfg -vvvv > Zaptel Configuration > ====================== > > Channel map: > Channel 01: FXS Kewlstart (Default) (Slaves: 01) > Channel 02: FXS Kewlstart (Default) (Slaves: 02) > > 2 channels configured. > > ZT_CHANCONFIG failed on channel 2: No such device or address (6) > > > cameron. > > > On Fri, 31 Oct 2003, Sergio Serrano Revuelto wrote: > > > Try to load module manually: modprobe wcfxo; ztcfg -vvvv > > > > srsergio > > > > > > > > > > -----Mensaje original----- > > De: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] En nombre de Cameron > > Palmer Enviado el: viernes, 31 de octubre de 2003 6:27 > > Para: [EMAIL PROTECTED] > > Asunto: [Asterisk-Users] 2 X100Ps give error > > > > > > I have two X100Ps in my zaptel.conf and have it configured: > > > > fxsks=1-2 > > > > When starting rc.zaptel I get the error: > > > > Loading zaptel framework... > > Loading zaptel hardware modules: wcfxo wcusb > > Running ztcfg... > > ZT_CHANCONFIG failed on channel 2: No such device or address (6) > > > > As far as I can tell from the archived mailing lists I shouldn't have > > this problem. > > > > I do notice a difference in lspci which concerns me: > > > > 00:0d.0 Communication controller: Tiger Jet Network Inc. Intel 537 > > 00:0e.0 Serial controller: Tiger Jet Network Inc. Intel 537 > > > > Why is one listed as a Communication controller and the other a serial > > controller? > > > > What I'm trying to do... > > I have activated the second line option and put it into a call hunt > > with > > > > the first line on my Vonage account. At the office I have a Konexx DWI > > connecting my Nortel phone to my desktop running RedHat and a X100P. > My > > goal is seamless (as far as my boss in Santa Cruz can tell) > connectivity > > > > between home and office but maintaining a low ongoing cost. Namely > > about > > > > $60 per month. > > > > Other details... > > > > The home setup - > > 2 7960G SIP phones > > 1 ATA-186 > > Linux (slackware 9.1) 2.4.22 on PIII 650MHz > > Connected to Vonage over the POTS. > > 2 X100P FXO Cards > > > > The office setup - > > Dell Precision 650 > > Redhat 9 > > 1 X100P FXO Card > > Konexx DWI connected to Nortel phone > > > > _______________________________________________ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > _______________________________________________ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
