>My goal is when a call comes to the main number which is (555) 222 0001, >to have it roll over to the next available T1 channel. >Or give busy signal to the caller if all channels are busy. To have one >main number for all calls.
I believe the dialstring: exten => _XXXXXXX,1,Dial(Zap/G0/5551212) will do a top-down hunt (starting from channel 23) whereas exten => _XXXXXXX,1,Dial(Zap/g0/5551212) will do a bottom-up hunt (starting from channel 1) The difference is g0 vs G0 (Group Zero, assuming you have a group zero. You would change this if you had more than 1 group. For example, you could split your PRI into two groups,0 and 1, leave a few channels for your pilot number and allocate the rest for your DID's. In this case you would use: exten => _XXXXXXX,1,Dial(Zap/g1/5551212) or exten => _XXXXXXX,1,Dial(Zap/G1/5551212) depending on how you want to do the hunt. hth _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
