hi i am experiencing some problems with the configuration of an BN8S0 Beronet card. I've downloaded last CVS of mISDN ans mISDNuser, i patch the kernel 2.6.16.18 and the enabled the following:
<*> ISDN support x x Old ISDN4Linux ---> x x --- CAPI subsystem x x <M> CAPI2.0 support x x [*] Verbose reason code reporting (kernel size +=7K) x x [*] CAPI2.0 Middleware support (EXPERIMENTAL) x x <M> CAPI2.0 /dev/capi support x x [*] CAPI2.0 filesystem support x x --- CAPI hardware drivers x x Active AVM cards ---> x x Active Eicon DIVA Server cards ---> x x Modular ISDN driver ---> <M> Support modular ISDN driver x x [*] Enable memory leak debug for mISDN x x [*] Support for AVM Fritz!Cards x x [ ] Support for HFC PCI cards x x [*] Support for HFC multiport cards (HFC-4S/8S/E1) x x [*] HFC multiport driver with memory mapped IO after the kernel recompilation and the reboot i build and install mISDNuser with make and make install. The card is recognized by the system, this is the output of lspci: 00:0d.0 ISDN controller: Cologne Chip Designs GmbH ISDN network Controller [HFC-8S] (rev 01) and i can load hfcmulti and mISDN_dsp without problems... all channels are configured in TE mode, i use this modprobe: /sbin/modprobe hfcmulti layermask=0xf,0xf,0xf,0xf,0xf,0xf,0xf,0xf protocol=0x2,0x2,0x2,0x2,0x2,0x2,0x2,0x2 type=0x08 /sbin/modprobe mISDN_dsp and this is the output of dmesg: Modular ISDN Stack core $Revision: 1.34 $ mISDNd: kernel daemon started mISDNd: test event done mISDN: HFC-multi driver Rev. 1.41 0 devices registered mISDN_dsp: Audio DSP Rev. 1.17 (debug=0x0) EchoCancellor MG2 mISDN_dsp: DSP clocks every 64 samples. This equals 2 jiffies. why i get 0 devices registrered? where am i wrong? thanks in advance nik _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
