I have an SPA-3000 that I was going to experiment with by connecting it to various FXS ata's I have here. I am open to using a pci card or anything that provides good results. The general scheme for incoming is as follows:
1) Disable the call waiting feature for the ata number and connect it to asterisk using FXO hardware. 2) Config the primary number to call forrward on busy to a another number that asterisk can service via sip or iax. If that number is a vonage softphone the forwarded calls are free(in network) and you get 2 more channels. That gives you the capability of 3 total incoming channels and you get caller ID with name. Using a vonage softphone means you don't need the unlimited plan on the primary number. Curt Shaffer wrote: >Sorry, I guess that would help! I was using an X100P so I am sure that was a >large part of the problem. > >-----Original Message----- >From: [EMAIL PROTECTED] >[mailto:[EMAIL PROTECTED] On Behalf Of Paul >Sent: Tuesday, June 06, 2006 1:38 PM >To: Asterisk Users Mailing List - Non-Commercial Discussion >Subject: Re: [Asterisk-Users] Vonage and FXO > >It would be helpful if responders would tell us what FXO hardware they >are using and which vonage ATA device it connects to. > >Padmanaban Balasubramaniam wrote: > > > >>I am using it with my [EMAIL PROTECTED] setup. I did not face any issues with >>echo, but >>once in a while, the trunk does NOT get disconnected even after the call >> >> >has > > >>been completed. So I had to manually plug the phone cable out from FXO and >>plug it back again. But I think that's something to do with my version of >>FXO drivers. >> >>Otherwise it works for me. >> >>Paddu >> >>-----Original Message----- >>From: [EMAIL PROTECTED] >>[mailto:[EMAIL PROTECTED] On Behalf Of Curt Shaffer >>Sent: Tuesday, June 06, 2006 10:37 AM >>To: 'Asterisk Users Mailing List - Non-Commercial Discussion' >>Subject: RE: [Asterisk-Users] Vonage and FXO >> >>I used a scenario like this before but I always ran into intermittent echo >>issues that were just not worth the hassle for me so I switched to a sole >> >> >IP > > >>origination and termination service. >> >>Just my personal experience! >> >>HTH >> >>Curt >> >>-----Original Message----- >>From: [EMAIL PROTECTED] >>[mailto:[EMAIL PROTECTED] On Behalf Of mustardman29 >>Sent: Tuesday, June 06, 2006 12:22 PM >>To: [email protected] >>Subject: [Asterisk-Users] Vonage and FXO >> >> >>Is anyone using Vonage on an FXO port in Asterisk? How well does it work? >>Specifically, any echo/delay problems? >> >>Second part, I am assuming it is possible to separate fxo ports for least >>cost routing correct? In other words, I would like the routing to be such >>that any local or 1-800# dials fxo ports 1-4 which is a normal 4 line >> >> >analog > > >>PSTN connection. Any long distance call will try to dial fxo port 5 >> >> >(Vonage > > >>ATA) first and if it's used then use fxo ports 1-4. Is this easy to do in >>FreePBX? >> >>I know I can get a Vonage softphone account and not use an ATA/FXO port. I >>want to know if I can do it with an ATA/FXO. >>_______________________________________________ >>--Bandwidth and Colocation provided by Easynews.com -- >> >>Asterisk-Users mailing list >>To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> >>_______________________________________________ >>--Bandwidth and Colocation provided by Easynews.com -- >> >>Asterisk-Users mailing list >>To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> >>_______________________________________________ >>--Bandwidth and Colocation provided by Easynews.com -- >> >>Asterisk-Users mailing list >>To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> >> >> >> > >_______________________________________________ >--Bandwidth and Colocation provided by Easynews.com -- > >Asterisk-Users mailing list >To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > >_______________________________________________ >--Bandwidth and Colocation provided by Easynews.com -- > >Asterisk-Users mailing list >To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
