Doug, Well I am told that INFO does not work with * VM. I never tried it.... In any event the answer here was to use INBAND for the fxo (PSTN tab) and in sip.config for fxo also set INBAND and allow only ulaw. I was able to leave the fxs1 channel at auto on the Line 1 tab and rfc8233 in sip.c - also you cannot use any feature flags for the PSTN channel, either in or out.
This is for the SPA-3000 Doug On Tue, 6 Jun 2006, Doug wrote: > At 21:03 6/6/2006, Doug Crompton wrote: > >Nick, > > > > Here is what I have been able to ascertain in the past few days. > > Hey Doug, > > I went through a similar hassle with Linksys PAP2's a few > weeks back. I went round and round with Linksys tech support. > They said use "AVT". I tried it and it didn't work. > > What did work both inbound and outbound was "INFO" (sometimes > called "SIP INFO"). This did the trick for us. Try it and > let us know. > **************************** * Doug Crompton * * Richboro, PA 18954 * * 215-431-6307 * * * * [EMAIL PROTECTED] * * http://www.crompton.com * **************************** _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
