[Asterisk-Users] CLI comand to register softphones without close them:

[Shenen Shenen]

Hi;I've a question:

I use asterisk -R so I can see what's appening in my asterisk and the session of the calls:

I use the vrrp protocol, I use 2 asterisk box;when the master falls down, the slave goes up, and I use X-lite,Phoner,3CXphone;some of this softphones are immediately registered to the slave, but sometimes this don't happen;I must close the softphone from my xp and restart them,and then in the CLI interface I can see that the softphone are restistered in this way:

 

 Verbosity is at least 3
    -- Registered SIP '651' at 192.168.251.10 port 5060 expires 900
    -- Registered SIP '650' at 192.168.251.10 port 5061 expires 1800
    -- Registered SIP '655' at 192.168.251.10 port 3571 expires 900

and then they are ok and I can call.

 

If I use the "restart now" command or "reload" in the CLI of the slave, asterisk don't see that the softphones are up, I must close the softphones and restart them.

How can I reload the softphones, without restart them?

THANKS,

Emanuele

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users