Hi,
I am in a problem. Can anybody help me out.
I have established connection using hyperterminal through IAXsoft modem
using asterisk PBX. I have done the following settings in the
configuraion files of asterisk.
1) iax.conf file:
[iaxmodem]
type=friend
;username=iaxmodem
;secret=n19d19
host=dynamic
qualify=yes
;trunk=yes
;context=in-fax
disallow=all
allow=ulaw
allow=alaw
allow=gsm
[iaxmodem1]
type=friend ;type=peer
;username=iaxmodem
;secret=n19d19
host=dynamic
qualify=yes
;trunk=yes
;context=in-fax ;not required
allow=ulaw
allow=alaw
allow=gsm
2)extensions.conf file
exten => 12,1,Dial(IAX2/iaxmodem1)
//for dialing to modem2 with extension number 12 through modem1 using
hyperterminal
3) created ttyIAX0 and ttyIAX1 file in path /etc/iaxmodem
ttyIAX0 file:
device /dev/ttyIAX0
owner uucp:uucp
mode 660
port 4571
refresh 100
server 127.0.0.1
peername iaxmodem
secret password
#Cidname John0
#Cidnumber 8005551212
codec slinear
ttyIAX1 file:
device /dev/ttyIAX1
owner sanchal:uucp
mode 660
port 4572
refresh 300
server 127.0.0.1
peername iaxmodem1
#secret password
cidname John2
cidnumber 8005551231
codec slinear
4)Now using hyper terminal send atdt12 from one side it sends ring to
other side . On replying ATA from other side, it sends connect but not
in accordance with class1 format.
Client OtherEnd
at+fclass=1 --> <-- at+fclass=1
OK <-- --> OK
atdt12 --> --> ring
connect <-- <-- ATA
--> connect
OK <--
NOCARRIER <-- --> ERROR
NOTE - after connect till I put CSIFrame Data and DSI Frame DATA from
other end connection continues to live. After <dle><etx> and enter it
shows ERROR on on Other end, and, first OK then NOCARRIER on client end.
Can anybody tell me how to proceed further to transfer a file after
establishing a successful connection.
Regards
sanchal
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
