XO fixed my caller ID name. I am using FreePBX and I can include a "wait" to my custom extensions.
Is there a way to add a wait to the whole PRI? I assume that if I set immediate to yes, I can then have a "s" extension do the wait, but how would it get from the "s" to the DID extension? (also, I would rather not answer every call) Is there a "magic" spot in Free PBX's configs to add the wait for all calls on that PRI, or do I need to alter the FreePBX code to add it when creating the conf. Files? Thank You, Steven BerkHolz - MCSA - MCSE - Manager of Information Systems TESCO Group Companies Fax. 248-836-5101 www.TESCOGroup.com Board member of www.glimasoutheast.org "Steven" <[EMAIL PROTECTED]> wrote in message news:[EMAIL PROTECTED] > Thanks for the info. > > I went to add the Wait(2), but am unsure where to do it. > My context is "from-pstn". > > My [from-pstn] is: > [from-pstn] > exten => s,1,NoOp(${TIMESTAMP} PRI call in) ; I tried adding this to see if "s" is used, but lothing was logged. > include => from-pstn-custom ; create this context in extensions_custom.conf to include customizations > include => ext-did > exten => fax,1,Goto(ext-fax,in_fax,1) > > My "from-pstn-custom" is non-existent and my "ext-did" is just an include for "ext-local", which is my inside extensions. > > If I understand you correctly, I need the wait before I pick up the line. > If I change the span to immediate=yes, I can use the "s" extension, but It would also answer the line early. > > I am drawing a blank where to put the wait. > > Please advise. > > > > > > > -- > -- > Steven > > http://www.glimasoutheast.org > > > > "Alexander Lopez" <[EMAIL PROTECTED]> wrote in message news:[EMAIL PROTECTED] > There is nothing you really need 'to do' if your PRI is working already, > If you are able to receive and make calls your D-Channel is functioning > properly. In the case of CallerID, some telcos provide this extra > function via the FACILITY messages instead of the SETUP messages, If > that is the case, you will get no Name but you will get a number. IT > simply means that Asterisk answered the call with the SETUP message but > was unable to read in the CALLERID Name to pass on to your devices > because it comes later on in the call via the FACILITY. > > Add a Wait(2) before you answer the call for your PRI, see if that > helps. > > > >> -----Original Message----- >> From: [EMAIL PROTECTED] >> [mailto:[EMAIL PROTECTED] On Behalf Of Steven >> Sent: Monday, April 10, 2006 8:57 AM >> To: asterisk-users@lists.digium.com >> Subject: [Asterisk-Users] callerid name inboune from PRI >> >> I switched PRI vendors recently, and one of my questions was >> "do you provide caller ID name in addition to number?" >> AT&T Local did not, But XO communications said they did. >> >> Before I call to complain, is there an setting to turn this >> on in asterisk? >> I want to make sure that I have my side covered before I call XO. >> >> My current zaptel.conf is: >> >> context=from-pstn >> switchtype=national >> pridialplan=unknown >> prilocaldialplan=unknown >> priindication = outofband >> signalling=pri_cpe >> usecallerid=yes >> hidecallerid=no >> usecallingpres=yes >> echocancel=yes >> echocancelwhenbridged=no >> group=0 >> callgroup=1 >> pickupgroup=1 >> accountcode=I >> musiconhold=default >> channel => 1-23 >> >> >> >> >> -- >> -- >> Steven >> >> http://www.glimasoutheast.org >> > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users