Hi all,
Your help would be greatly appreciated, I have been struggling for days with inst / config of TDM01B.
I have installed TDM01B.
Using Asterisk 1.2.9.1 on RH Ent 4.00
cat /proc/interrupts shows card wctdm on int 10.
Green LED is on (module is in port 4).
I have my /etc/zaptel.conf which includes fxsks=4
zttool show my card.
ztcfg -vv shows my card.
zap show status shows my card but I see only pseudo under zap show channels.
Furthermore, when I call my pstn line, I see no activity on the CLI
I even tried
[pstn-line]
exten => s,1,answer()
exten => s,2,hangup()
I can't get it to work.
Here is my zapata.conf
[channels]
context=pstn-line
signalling=fxs_ks
echocancel=yes
echotraining=800
echocancelwhenbridged=no
rxgain=0.0
txgain=0.0
immediate=no
callprogress=no
;channel => 4
context=pstn-line
signalling=fxs_ks
echocancel=yes
echotraining=800
echocancelwhenbridged=no
rxgain=0.0
txgain=0.0
immediate=no
callprogress=no
;channel => 4
If I uncomment channel => 4, asterisk will not start.
Looking forward to any response!
(I have looked at very helpful post at http://lists.digium.com/pipermail/asterisk-users/2005-March/090564.html with no success)
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
