- Adtran TA750 bought off Ebay for around $400 (you can do much better, I was in a hurry.)
- A Digium Wildcard T100P
- A 4 port FXO card for the TA750 (I searched Google for "Adtran FXO" and clicked one of the sposored links.)
You might have to pick up some other misc bits & pieces depending on what the Channel bank you get off EBay has. I had to buy a 25 pair cable with an Amphenol connector and a Type 66 punch down block.
Right now my set up has an evil hum on outgoing calls. I suspect the home brew T1 reverse cable I'm using.
HTH.
brez wrote:
hello,
I am completely new to things but was wondering if some one could steer me in the right direction [i.e. i was volunteered to get a PBX running with little or knowledge] good news is, i got a lot of experience with open source / linux / etc. anyhow. we have 4 lines coming in and need 16 extensions. we have the PC and the 16 analog phones. the question is what type of hardware will i need? i.e. modem, a phone 'hub' [or whatever it is called for pluggin all the phone lines into] - basically a small office environment. if any of you using asterisk in a similar environment could spell out exactly what hardware youre using [and perhaps where to buy it] for your office, i would really appreciate the help.
thanks.
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
