That is the first thing I did.. rxgain seems to help to make it louder when the two PSTN lines are bridged but also affects
the audio quality adversely.  It's very touchy.. it also causes horrible feedback (loud screeching when lines bridge). 
I've upgraded zapata and libpri too.

JD

Carlos Rojas wrote:
Hi,

I solved this problem in zapata.conf file

;rxgain=0.0                             ;Volume RX
rxgain=8.0                             ;Volume RX
;txgain=0.0                             ;Volume TX
txgain=1.0                             ;Volume TX


Regards

On 6/9/06, news.asterisk.users < [EMAIL PROTECTED]> wrote:
I've been attempting to get this TDM400 card to work since March.
While it sort of works, I'm having a lot of audio issues with it.
I am on Asterisk 1.2.9.1 svn rev 32797 and Zaptel 1.2.6. 

I've tried moving it to beefier hardware, upgrading asterisk/zaptel/etc, 

moving the X100 cards around on the TDM400 card, nothing seems to fix it.
The card says it's a revision J card. 

I get low volume on the receiving end (too quiet to hear when channels bridge) and
adjusting rx/txgain to comfortable levels causes popping and clicking when 

calls are made that cause bridged channels.  Upgrading to the newest zaptel fixed the horrible echo
and feedback issues I was having.

Before I send it in for a replacement I thought I'd ask about it in case there is a setting

I can make to fix it.

    




Kernel Version 2.6.9-34.0.1.ELsmp (SMP)
Distro Name CentOS release 4.3 (Final)
Uptime 2 hours 57 minutes
Current Users 0
Load Averages 0.08 0.02 0.01

Network Usage
Device Received Sent Err/Drop
lo 2.02 MB 2.02 MB 0/0
eth0 2.49 MB 4.67 MB 0/0
sit0 0.00 KB 0.00 KB 0/0
Hardware Information
Processors 2
Model Intel(R) Pentium(R) D CPU 2.66GHz
CPU Speed 2.66 GHz
Cache Size 1024 KB
System Bogomips 10646.51
PCI Devices
- Audio device: Intel Corporation 82801G
- Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface
- Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller
- IDE interface: Intel Corporation 82801GB/GR/GH
- SMBus: Intel Corporation 82801G
- VGA compatible controller: Intel Corporation 945G/GZ Express Integrated Graphics Controller
IDE Devices
- hdc: CD-RW IDE5224
SCSI Devices
- ATA WDC WD2500KS-00M (Direct-Access)
Memory Usage
Type Percent Capacity Free Used Size
Physical Memory 20% 806.78 MB 195.65 MB 1002.43 MB
- Kernel + applications 14%   135.73 MB  
- Buffers  2%   17.18 MB  
- Cached 4%   42.75 MB  
Disk Swap 0% 760.88 MB 0.00 KB 760.88 MB
Mounted Filesystems
Mount Type Partition Percent Capacity Free Used Size
/ ext3 /dev/sda2 1% 215.06 GB 1.74 GB 228.40 GB
/dev/shm proc none 0% 501.21 MB 0.00 KB 501.21 MB
/dev/shm sysfs none 0% 501.21 MB 0.00 KB 501.21 MB
/dev/shm devpts none 0% 501.21 MB 0.00 KB 501.21 MB
/boot ext3 /dev/sda1 17% 77.33 MB 16.29 MB 98.72 MB
/dev/shm tmpfs none 0% 501.21 MB 0.00 KB 501.21 MB
/dev/shm tmpfs none 0% 501.21 MB 0.00 KB 501.21 MB
Totals :   1% 215.63 GB 1.75 GB 228.98 GB

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users




_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to