I'm not a specialist at reading PRI debug output, but I did notice that your inbound calls are using u-Law whereas your outbound calls are using A-Law. Maybe that's the issue?
Thanks, Greg > -----Original Message----- > From: Who Carez? [mailto:[EMAIL PROTECTED] > Sent: Thursday, June 15, 2006 12:04 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: [Asterisk-Users] Bearer capabilities on PRI > > Hey all, > > I am running a Asterisk 1.2.9.1 with Sangoma A101 card, newest firmware, > configured with a help from Sangoma Tech Support, running fine. It is > connected to a PRI circuit split from Cisco MC 3810, which in turn is > connected to a Converged T from CTC Communications. > > While Asterisk works fine and I can call in/out on my BV account, I am > only able to dial in through CTC. I have spent last 4 days researching > the issue and here is what it boils down to: > > 1. The Asterisk box sends 809083 as bearer capabilities while the other > side expects 809082. Where can I change that? Attached is the snippet > from my log file. > > ------------------------------------- > OUTGOING CALL > ------------------------------------- > > > pri debug span 1 > Enabled debugging on span 1 > -- Executing Set("SIP/311-cd0b", "CALLERID(number)=8605551212") in > new stack > -- Executing SetCallerID("SIP/311-cd0b", ""L"") in new stack > -- Executing Dial("SIP/311-cd0b", "Zap/g1/8601234567") in new stack > -- Making new call for cr 32772 > -- Requested transfer capability: 0x00 - SPEECH > > Protocol Discriminator: Q.931 (8) len=36 > > Call Ref: len= 2 (reference 4/0x4) (Originator) > > Message type: SETUP (5) > > [04 03 80 90 a3] > > Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer > capability: Speech (0) > > Ext: 1 Trans mode/rate: 64kbps, > circuit-mode (16) > > Ext: 1 User information layer 1: A-Law > (35) > > [18 03 a9 83 81] > > Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, > Exclusive Dchan: 0 > > ChanSel: Reserved > > Ext: 1 Coding: 0 Number Specified Channel > Type: 3 > > Ext: 1 Channel: 1 ] > > [1e 02 80 83] > > Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard > (0) 0: 0 Location: User (0) > > Ext: 1 Progress Description: Calling > equipment is non-ISDN. (3) ] > > [6c 02 00 c3] > > Calling Number (len= 4) [ Ext: 0 TON: Unknown Number Type (0) NPI: > Unknown Number Plan (0) > > Presentation: Number not available (67) '' ] > > [70 0b a1 38 36 30 32 32 34 35 39 30 30] > > Called Number (len=13) [ Ext: 1 TON: National Number (2) NPI: > ISDN/Telephony Numbering Plan (E.164/E.163) (1) '8601234567' ] > -- Called g1/8601234567 > < Protocol Discriminator: Q.931 (8) len=9 > < Call Ref: len= 2 (reference 4/0x4) (Terminator) > < Message type: RELEASE COMPLETE (90) > < [08 02 82 e4] > < Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 > Location: Public network serving the local user (2) > < Ext: 1 Cause: Unknown (100), class = Protocol Error > (6) ] > -- Processing IE 8 (cs0, Cause) > -- Channel 0/1, span 1 got hangup > Jun 14 13:34:39 WARNING[27880]: app_dial.c:713 wait_for_answer: Unable > to forward voice > NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null > NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null > -- Hungup 'Zap/1-1' > == Everyone is busy/congested at this time (1:0/0/1) > == Auto fallthrough, channel 'SIP/311-cd0b' status is 'CHANUNAVAIL' > > ------------------------------------- > INCOMING CALL > ------------------------------------- > > < Protocol Discriminator: Q.931 (8) len=63 > < Call Ref: len= 2 (reference 1057/0x421) (Originator) > < Message type: SETUP (5) > < [04 03 90 90 a2] > < Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer > capability: 3.1kHz audio (16) > < Ext: 1 Trans mode/rate: 64kbps, > circuit-mode (16) > < Ext: 1 User information layer 1: u-Law > (34) > < [18 03 a9 83 81] > < Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive > Dchan: 0 > < ChanSel: Reserved > < Ext: 1 Coding: 0 Number Specified Channel > Type: 3 > < Ext: 1 Channel: 1 ] > < [1c 15 9f 8b 01 00 a1 0f 02 01 01 06 07 2a 86 48 ce 15 00 04 0a 01 00] > < Facility (len=23, codeset=0) [ 0x9f, 0x8b, 0x01, 0x00, 0xa1, 0x0f, > 0x02, 0x01, 0x01, 0x06, 0x07, 0x2a, 0x86, 'H', 0xce, 0x15, 0x00, 0x04, > 0x0a, 0x01, 0x00 ] > < [1e 02 84 83] > < Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) > 0: 0 Location: Public network serving the remote user (4) > < Ext: 1 Progress Description: Calling > equipment is non-ISDN. (3) ] > < [6c 0c 21 83 37 38 31 35 32 32 37 37 31 31] > < Calling Number (len=14) [ Ext: 0 TON: National Number (2) NPI: > ISDN/Telephony Numbering Plan (E.164/E.163) (1) > < Presentation: Presentation allowed of > network provided number (3) '7815227711' ] > < [70 05 80 35 30 30 30] > < Called Number (len= 7) [ Ext: 1 TON: Unknown Number Type (0) NPI: > Unknown Number Plan (0) '5000' ] > -- Making new call for cr 1057 > -- Processing Q.931 Call Setup > -- Processing IE 4 (cs0, Bearer Capability) > -- Processing IE 24 (cs0, Channel Identification) > -- Processing IE 28 (cs0, Facility) > Handle Q.932 ROSE Invoke component > -- Processing IE 30 (cs0, Progress Indicator) > -- Processing IE 108 (cs0, Calling Party Number) > -- Processing IE 112 (cs0, Called Party Number) > > Protocol Discriminator: Q.931 (8) len=10 > > Call Ref: len= 2 (reference 1057/0x421) (Terminator) > > Message type: CALL PROCEEDING (2) > > [18 03 a9 83 81] > > Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, > Exclusive Dchan: 0 > > ChanSel: Reserved > > Ext: 1 Coding: 0 Number Specified Channel > Type: 3 > > Ext: 1 Channel: 1 ] > -- Accepting call from '7815227711' to '5000' on channel 0/1, span 1 > -- Executing Goto("Zap/1-1", "mainmenu|s|1") in new stack > -- Goto (mainmenu,s,1) > -- Executing Ringing("Zap/1-1", "") in new stack > > Protocol Discriminator: Q.931 (8) len=9 > > Call Ref: len= 2 (reference 1057/0x421) (Terminator) > > Message type: ALERTING (1) > > [1e 02 81 88] > > Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard > (0) 0: 0 Location: Private network serving the local user (1) > > Ext: 1 Progress Description: Inband > information or appropriate pattern now available. (8) ] > -- Executing Wait("Zap/1-1", "3") in new stack > < Protocol Discriminator: Q.931 (8) len=36 > < Call Ref: len= 2 (reference 1057/0x421) (Originator) > < Message type: FACILITY (98) > < [1c 1d 9f 8b 01 00 a1 17 02 01 01 02 01 00 80 0f 43 54 43 2c 43 4f 4d > 4d 55 4e 49 43 41 54 49] > < Facility (len=31, codeset=0) [ 0x9f, 0x8b, 0x01, 0x00, 0xa1, 0x17, > 0x02, 0x01, 0x01, 0x02, 0x01, 0x00, 0x80, 0x0f, 'CTC', 0x2c, 'COMMUNICATI' > ] > -- Processing IE 28 (cs0, Facility) > Handle Q.932 ROSE Invoke component > -- Executing BackGround("Zap/1-1", "thank-you-for-calling") in new > stack > > Protocol Discriminator: Q.931 (8) len=14 > > Call Ref: len= 2 (reference 1057/0x421) (Terminator) > > Message type: CONNECT (7) > > [18 03 a9 83 81] > > Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, > Exclusive Dchan: 0 > > ChanSel: Reserved > > Ext: 1 Coding: 0 Number Specified Channel > Type: 3 > > Ext: 1 Channel: 1 ] > > [1e 02 81 82] > > Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard > (0) 0: 0 Location: Private network serving the local user (1) > > Ext: 1 Progress Description: Called > equipment is non-ISDN. (2) ] > -- Playing 'thank-you-for-calling' (language 'en') > < Protocol Discriminator: Q.931 (8) len=5 > < Call Ref: len= 2 (reference 1057/0x421) (Originator) > < Message type: CONNECT ACKNOWLEDGE (15) > -- Executing BackGround("Zap/1-1", "main-menu") in new stack > -- Playing 'main-menu' (language 'en') > -- Executing BackGround("Zap/1-1", "if-u-know-ext-dial") in new stack > -- Playing 'if-u-know-ext-dial' (language 'en') > == CDR updated on Zap/1-1 > -- Executing Macro("Zap/1-1", "officetemplate") in new stack > -- Executing GotoIf("Zap/1-1", "0?2:3") in new stack > -- Goto (macro-officetemplate,s,3) > -- Executing Dial("Zap/1-1", "SIP/311|20|r") in new stack > -- Called 311 > -- SIP/311-ef72 is ringing > -- SIP/311-ef72 answered Zap/1-1 > == Spawn extension (macro-officetemplate, s, 3) exited non-zero on > 'Zap/1-1' in macro 'officetemplate' > == Spawn extension (macro-officetemplate, s, 3) exited non-zero on > 'Zap/1-1' > NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Active, peerstate Active > > Protocol Discriminator: Q.931 (8) len=9 > > Call Ref: len= 2 (reference 1057/0x421) (Terminator) > > Message type: DISCONNECT (69) > > [08 02 81 90] > > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 > Location: Private network serving the local user (1) > > Ext: 1 Cause: Unknown (16), class = Normal Event (1) > ] > -- Hungup 'Zap/1-1' > < Protocol Discriminator: Q.931 (8) len=5 > < Call Ref: len= 2 (reference 1057/0x421) (Originator) > < Message type: RELEASE (77) > NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Release > Request > > Protocol Discriminator: Q.931 (8) len=9 > > Call Ref: len= 2 (reference 1057/0x421) (Terminator) > > Message type: RELEASE COMPLETE (90) > > [08 02 81 90] > > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 > Location: Private network serving the local user (1) > > Ext: 1 Cause: Unknown (16), class = Normal Event (1) > ] > NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null > NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null > > ---------------------------------------------- > ZAPATA.CONF > ---------------------------------------------- > > [trunkgroups] > > [channels] > switchtype=national > context=from-ctc > signalling=pri_cpe > ;prilocaldialplan=local > group=1 > channel => 1-23 > busydetect=no > callprogress=no > > Anyone? Thanks in advance, > > Daniel > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
